DJ_L3ThAL
Such rapp, very bass
- Joined
- 11/5/10
- Messages
- 3,206
- Reaction score
- 1,454
PID Electric Brewing Element Control Box & Pump - $150
Cable setup to plug straight into the box (or can plug an IEC cable from mains directly in too to run pump without the box). Can control mash temperature with HERMS/RIMS, or any vessel heating element for brewing. But also could control any heating/cooling or other electrical load (sous vide, smokers, pizza, etc). Plug in and ready to use! Can show how to use. Red Lion PXU manual has instructions on how to configure PID if you want to re-tune (auto-tune) or change others settings. Changing set point is as easy as UP/DOWN arrow though.
- Red Lion PXU PID (RRP $390!)
- RTD temperature sensor (PT100) - highest grade industrial quality - BRAND NEW!
- Control up to 10A/2400W Heating element (or any load) with PID (also has ON/OFF select switch).
- Control pump ON/OFF with switch.
- Plugs are IEC 10A connectors (standard computer cable - readily available).
Cable setup to plug straight into the box (or can plug an IEC cable from mains directly in too to run pump without the box). Can control mash temperature with HERMS/RIMS, or any vessel heating element for brewing. But also could control any heating/cooling or other electrical load (sous vide, smokers, pizza, etc). Plug in and ready to use! Can show how to use. Red Lion PXU manual has instructions on how to configure PID if you want to re-tune (auto-tune) or change others settings. Changing set point is as easy as UP/DOWN arrow though.
Last edited: