DJ_L3ThAL
Such rapp, very bass
- Joined
- 11/5/10
- Messages
- 3,182
- Reaction score
- 1,449
High precision oxygenation setup - $350 (RRP of gear is a LOT more than this). Has not had much use in pristine as new condition. Clean and ready to use.
Comweld Series-O oxygen regulator (Pin index cylinders ONLY - can be changed if you purchase an industrial gas cylinder adaptor, I can show you where to get this if needed).
RTM3 Precision flowmeter (0-1.5LPM oxygen flow with high resolution).
Length of standard 5.5mm ID beer/gas line.
Connect to in-line oxygenation setup, or add sintered stone to end of a hose/wand for manual dosing.
Both regulator and flowmeter have instructions with them as shown in photo.
Comweld Series-O oxygen regulator (Pin index cylinders ONLY - can be changed if you purchase an industrial gas cylinder adaptor, I can show you where to get this if needed).
RTM3 Precision flowmeter (0-1.5LPM oxygen flow with high resolution).
Length of standard 5.5mm ID beer/gas line.
Connect to in-line oxygenation setup, or add sintered stone to end of a hose/wand for manual dosing.
Both regulator and flowmeter have instructions with them as shown in photo.
