New Perlick Taps!

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Carboy - 1
tazman1967 - 2
Cocko - 2
Hogan - 3
Razz - 1
Eric8 - 2
Daemon - 2
Beerstan - 2
Baris - 2
Rudy - 4
Malbur - 2
Supra-Jim - 5
Beers - 2
canon1ball - 2
kirem - 4
robbo5253 - 2
marky_mark - 2
stubbie - 4
Blackfish - 2
Fatgodzilla - 2
Brendo - 4 (and poss shanks - depending on price)
Jimi - 1 (only if I can get the shank and handle also ... ph34r.gif )
JonnyAnchovy - 1 (also in for shank, handle and tails).


Just taking myself off the list to save any confusion.
 
Carboy - 1
tazman1967 - 2
Cocko - 2
Hogan - 3
Razz - 1
Eric8 - 2
Daemon - 2
Beerstan - 2
Baris - 2
Rudy - 4
Malbur - 2
Supra-Jim - 5
Beers - 2
canon1ball - 2
kirem - 4
robbo5253 - 2
marky_mark - 2
stubbie - 4
Blackfish - 2
Fatgodzilla - 2
Brendo - 4 (and poss shanks - depending on price)
Jimi - 1 (only if I can get the shank and handle also ... ph34r.gif )
JonnyAnchovy - 1 (also in for shank, handle and tails).
Vitalstatistix - 3 (also in for shanks & handles)


Man this is awesome, I have just started purchasing components for a kegerator and was looking at these taps. I hope I am not too late...?
 
Carboy - 1
tazman1967 - 2
Cocko - 2
Hogan - 3
Razz - 1
Eric8 - 2
Daemon - 2
Beerstan - 2
Baris - 2
Rudy - 4
Malbur - 2
Supra-Jim - 5
Beers - 2
canon1ball - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
kirem - 4
robbo5253 - 2
marky_mark - 2
stubbie - 4
Blackfish - 2
Fatgodzilla - 2
Brendo - 4 (and poss shanks - depending on price)
Jimi - 1 (only if I can get the shank and handle also ... ph34r.gif )
JonnyAnchovy - 1 (also in for shank, handle and tails).
Vitalstatistix - 3 (also in for shanks & handles)
 
Carboy - 1
tazman1967 - 2
Cocko - 2
Hogan - 3
Razz - 1
Eric8 - 2
Daemon - 2
Beerstan - 2
Baris - 2
Rudy - 4
Malbur - 2
Supra-Jim - 5
Beers - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
canon1ball - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
kirem - 4
robbo5253 - 2
marky_mark - 2
stubbie - 4
Blackfish - 2
Fatgodzilla - 2
Brendo - 4 (and poss shanks - depending on price)
Jimi - 1 (only if I can get the shank and handle also ... ph34r.gif )
JonnyAnchovy - 1 (also in for shank, handle and tails).
Vitalstatistix - 3 (also in for shanks & handles)
 
Carboy - 1
tazman1967 - 2
Cocko - 2
Hogan - 3
Razz - 1
Eric8 - 2
Daemon - 2
Beerstan - 2
Baris - 2
Rudy - 4
Malbur - 2
Supra-Jim - 5
Beers - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
canon1ball - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
kirem - 4
robbo5253 - 2
marky_mark - 2
stubbie - 4
Blackfish - 2
Fatgodzilla - 2
Brendo - 4 (and poss shanks - depending on price)
Jimi - 1 (only if I can get the shank and handle also ... ph34r.gif )
JonnyAnchovy - 1 (also in for shank, handle and tails).
Vitalstatistix - 3 (also in for shanks & handles)
wilko - 1

Thanks Peteoz. Can't pass this up, especially at that price. Hopefully it's not too late! PM me for details

Cheers,
Wilko.
 
potentially stupid question *dons flame suit* but if you were mounting these taps into a collar on a chest freezer, do you still need an SS shank (I am thinking the answer is yes).

Brendo
 
^^^^ thanks for asking Brendo, I'm doing the same thing, and was starting to wonder along similar lines.

Cheers SJ
 
Thanks for that Sammus.

Seeing as though Brendo led with the 'silly' and i tagged along, it's my turn to further reveal my ignorance.

So the tap connects to the shank, shanks sits through the door/collar (effectively a way of mounting the tap), then something like this : http://www.craftbrewer.com.au/shop/details.asp?PID=3029
is connected to the shank to allow the beer line to be connected (i think there is also a john guest fitting getting around that does the job too).

Cheers SJ
 
Thanks for that Sammus.

Seeing as though Brendo led with the 'silly' and i tagged along, it's my turn to further reveal my ignorance.

So the tap connects to the shank, shanks sits through the door/collar (effectively a way of mounting the tap), then something like this : http://www.craftbrewer.com.au/shop/details.asp?PID=3029
is connected to the shank to allow the beer line to be connected (i think there is also a john guest fitting getting around that does the job too).

Cheers SJ

at least I know that much SJ :ph34r:

That's correct mate... I use JG fittings elsewhere, so would probably favour one of those for this type of set up, easier to pull apart for cleaning.
 
No worries, yeah JG fittings seems the go, no messing with clamps etc.

Remember Brendo, there are no stupid questions, only stupid people! :p

Cheers SJ
 
No worries, yeah JG fittings seems the go, no messing with clamps etc.

Remember Brendo, there are no stupid questions, only stupid people! :p

Cheers SJ


pfft clamps, I've never used a clamp on a beer line in my life, and I don't think theyre ever going to come off the barbs. I've tried getting them of a bunch of ways and the only way they come off is by cutting them. Pulling them results in either breaking the disconnect of the line, even when theyre pressurized.

but yeah you're right, something liek that is the go IF your shank doesn't come with one. Most shanks usually come with a nipple or something at the end as well as the lock nut, but that could be a choice of the store owner. I've noticed craftbrewer and northern brewer both sell the shanks without an end attachment. Morebeer's brass ones have a welded nipple on which I reckon is sexy, but I opted for S/S so have a screw on thing. I might go to JG one day, but these are working mighty fine as it is...
 
Latest Update. I got a quote for $202 for shipping, which is $165 cheaper!

YAY!

I am still waiting on another quote, which I should have by Friday. Sorry for teh delays, but I'm just trying to make it cheaper and easier.

Cheers!

James
 
Latest Update. I got a quote for $202 for shipping, which is $165 cheaper!
I am still waiting on another quote, which I should have by Friday. Sorry for teh delays, but I'm just trying to make it cheaper and easier.

You're a champ! Reckon the delay is worth it.

Thanks again,
c1b
 
Carboy - 1
tazman1967 - 2
Cocko - 2
Hogan - 3
Razz - 1
Eric8 - 2
Daemon - 2
Beerstan - 2
Baris - 2
Rudy - 4
Malbur - 2
Supra-Jim - 5
Beers - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
canon1ball - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
kirem - 4
robbo5253 - 2
marky_mark - 2
stubbie - 4
Blackfish - 2
Fatgodzilla - 2
Brendo - 4 (and poss shanks - depending on price)
Jimi - 1 (only if I can get the shank and handle also ... ph34r.gif )
JonnyAnchovy - 1 (also in for shank, handle and tails).
Vitalstatistix - 3 (also in for shanks & handles)
wilko - 1
Budron - 2 (and also in for 2x shank and tails)

Hope i'm not too late. Your a legend!
 
Carboy - 1
tazman1967 - 2
Cocko - 2
Hogan - 3
Razz - 1
Eric8 - 2
Daemon - 2
Beerstan - 2
Baris - 2
Rudy - 4
Malbur - 2
Supra-Jim - 5
Beers - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
canon1ball - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
kirem - 4
robbo5253 - 2
marky_mark - 2
stubbie - 4
Blackfish - 2
Fatgodzilla - 2
Brendo - 4 (and poss shanks - depending on price)
Jimi - 1 (only if I can get the shank and handle also ... ph34r.gif )
JonnyAnchovy - 1 (also in for shank, handle and tails).
Vitalstatistix - 3 (also in for shanks & handles)
wilko - 1
Budron - 2 (and also in for 2x shank and tails)
Archie82 - 1

Hope im not too late as well! :icon_cheers:
 
Carboy - 1
tazman1967 - 2
Cocko - 2
Hogan - 3
Razz - 1
Eric8 - 2
Daemon - 2
Beerstan - 2
Baris - 2
Rudy - 4
Malbur - 2
Supra-Jim - 5
Beers - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
canon1ball - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
kirem - 4
robbo5253 - 2
marky_mark - 2
stubbie - 4
Blackfish - 2 (also in for 3" s/s shanks, handles and s/s tails if possible)
Fatgodzilla - 2
Brendo - 4 (and poss shanks - depending on price)
Jimi - 1 (only if I can get the shank and handle also ... ph34r.gif )
JonnyAnchovy - 1 (also in for shank, handle and tails).
Vitalstatistix - 3 (also in for shanks & handles)
wilko - 1
Budron - 2 (and also in for 2x shank and tails)
Archie82 - 1

whoop! this is getting bigger than ben hur!
Just updated the list with my shank request.
 
Carboy - 1
tazman1967 - 2
Cocko - 2
Hogan - 3
Razz - 1
Eric8 - 2
Daemon - 2
Beerstan - 2
Baris - 2
Rudy - 4 (also in for 3" s/s shanks, handles and s/s tails if possible, depending on price).
Malbur - 2
Supra-Jim - 5
Beers - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
canon1ball - 2 (also in for 3" s/s shanks, handles and s/s tails if possible).
kirem - 4
robbo5253 - 2
marky_mark - 2
stubbie - 4
Blackfish - 2 (also in for 3" s/s shanks, handles and s/s tails if possible)
Fatgodzilla - 2
Brendo - 4 (and poss shanks - depending on price)
Jimi - 1 (only if I can get the shank and handle also ... ph34r.gif )
JonnyAnchovy - 1 (also in for shank, handle and tails).
Vitalstatistix - 3 (also in for shanks & handles)
wilko - 1
Budron - 2 (and also in for 2x shank and tails)
Archie82 - 1
 

Latest posts

Back
Top