So after trawling through ahb for a long time, getting information and ideas for my keezer build, i thought id sign up to say hi and share my build with you all.
I picked up a cheap 164L fisher & paykel from Gumtree for $100 to kickstart the project.
It's big enough to fit x2 20l cornies, a 9l cornie and a co2 tank. It's not huge but it's gonna get the job done!
So after a trip to bunnings i had what i needed to start building the cabinet.
I am making a pine frame with ply paneling and some nice decorative chair rail.
I've raised the freezer since i took this photo so it sits 10mm above the frame.
All the panels are done, trimmings are on and the benchtop is nearly there.
I still need a 25mm timber railing to go under the counter so it will hide the mdf and the top edge of the cabinet.
I'm pretty happy with my progress so far, still a lot of work to go though.
Plans are:
Stc-1000
Eva-dry 500
12v fan
Dark stain with a gloss varnish on the sides and a 2 part epoxy for the counter trim.
Tiles for the counter and the front of the coffin
3 tap coffin with a 12v fan
Led lights behind the taps
Ss drip tray
I shall keep taking photos and posting updates as the build continues!
Looking forward to hearing some feedback and getting some tips!
- kneebone
I picked up a cheap 164L fisher & paykel from Gumtree for $100 to kickstart the project.
It's big enough to fit x2 20l cornies, a 9l cornie and a co2 tank. It's not huge but it's gonna get the job done!
So after a trip to bunnings i had what i needed to start building the cabinet.
I am making a pine frame with ply paneling and some nice decorative chair rail.
I've raised the freezer since i took this photo so it sits 10mm above the frame.
All the panels are done, trimmings are on and the benchtop is nearly there.
I still need a 25mm timber railing to go under the counter so it will hide the mdf and the top edge of the cabinet.
I'm pretty happy with my progress so far, still a lot of work to go though.
Plans are:
Stc-1000
Eva-dry 500
12v fan
Dark stain with a gloss varnish on the sides and a 2 part epoxy for the counter trim.
Tiles for the counter and the front of the coffin
3 tap coffin with a 12v fan
Led lights behind the taps
Ss drip tray
I shall keep taking photos and posting updates as the build continues!
Looking forward to hearing some feedback and getting some tips!
- kneebone