sandybits
Active Member
- Joined
- 4/10/13
- Messages
- 29
- Reaction score
- 1
I've just done an extract with hop addition for the first time. Its been in primary for 5 days and I was planning on leaving it for 2 to 3 weeks total as per John Palmer "How to Brew." I also wanted to try clearing this beer and bulk priming all in the primary.
I've had a hunt around but cant find anything specific. So I figure I will add my priming sugar to the primary then the gelatine, wait 1 to 2 days then bottle. I've got the fermenter on the fridge but it only gets down to 15C so I'm concerned the sugar addition may restart the ferment. But I can't work out how to bulk prime in the same vessel after clearing without defeating the whole clearing thing.
I could bulk prime in a bottling bucket or use carb drops but wanted to try clearing for the first time and was wondering if doing the bulk prime in the same vessel was possible/had been attempted by other?
Any advice...
I've had a hunt around but cant find anything specific. So I figure I will add my priming sugar to the primary then the gelatine, wait 1 to 2 days then bottle. I've got the fermenter on the fridge but it only gets down to 15C so I'm concerned the sugar addition may restart the ferment. But I can't work out how to bulk prime in the same vessel after clearing without defeating the whole clearing thing.
I could bulk prime in a bottling bucket or use carb drops but wanted to try clearing for the first time and was wondering if doing the bulk prime in the same vessel was possible/had been attempted by other?
Any advice...