powerdog69
Well-Known Member
- Joined
- 18/6/08
- Messages
- 91
- Reaction score
- 6
Relisted minus fridge and stainless bench. $1600ono This is a bargain!
Full HERMS homebrew/pilot system
This a great system for a brewer looking to brew full grain beer and brew it well. There is over $3500 in equipment here, and this is great value for someone who knows what they are getting.
The system is: HERMS recirc system with a stainless head pump (Chugger brand). Mash tun, insulated hot liquid vessel with fill indicator, temp controller and SS float cutoff. Includes a powerful gas burner (221MJ/hr) for boiling (BYO gas bottle). Also includes: Chiller plate, 5000ml conical flask, stir plate with magnet, 10 meters of silicon food grade hosing, all with American high flow camlock fittings for easy connect and disconnect. Includes 6 plastic fermenters of various sizes and spare taps, etc. Includes refractometer, hydrometer, water filter, mash paddles, 90l stainless steel brew pot with electro etched volume makers, stainless steel false bottom and stainless ball valves. This system is a labour of love that four friends built together, and has a brew capacity of 50l. It's just about everything you need to make great beer.
Award winning wheat beer has been produced with this system, and it has been used to produce many hundreds of litres of excellent beer (including for two separate weddings). All equipment is in good working order, cleaned properly after every use and well maintained. This would make a magnificent all grain brewing system for a homebrewer, or a great pilot/test system for a brewery. Photos attached. We are happy to answer any questions, and show the buyer through the system.
Sold as a complete Kit. Pickup from Yarraville in Melbourne only.
Stainless bench not included, available for $100 extra.
Extra info:
System capable of 50 liters of Beer at up to 6% and of course less volume at higher percentage
Mash to Mash-out ramp time of 20mins
PID tuned for within 0.5 c of desired MASH temp
Includes:
1 Inline brew pump with stainless head 26 LPM
1 Full set 1/2" High Flow SS316 cam lock fittings Made USA
1 90 litre 304 stainless steel pot
1 High Pressure LPG burner (221 MJ/hr)
1 Portable refractometer with SG
1 Hydrometer
1 30 plate heat exchanger
1 Conical Flask 5 litre
1 Dome stainless steel false bottom
4 Half inch bsb stainless ball valve
1 HLT 2.4 kilowatt heating element
3 30 litre plastic fermenters
3 60 liter plastic fermentor
1 Stainless steel mash paddle 76 cm
1 Wooden mash paddle
1 Custom PWM Magnetic Stir plate
1 H.E.R.M-it HX Heat Exchange - 2.4kw
2 Stainless steel 50 liter kegs (H.L.T and MASH Tun)
1 Inline Carbon Water filter
1 Auber PID Controller 10amp for H.E.R.M.S
1 STC100 Temperature controller HLT
10 Meters 12.5 x 18.5 mm Food Grade - Silicon Hose
1 Set of USA made SS high Flow CamLock connectors
Full HERMS homebrew/pilot system
This a great system for a brewer looking to brew full grain beer and brew it well. There is over $3500 in equipment here, and this is great value for someone who knows what they are getting.
The system is: HERMS recirc system with a stainless head pump (Chugger brand). Mash tun, insulated hot liquid vessel with fill indicator, temp controller and SS float cutoff. Includes a powerful gas burner (221MJ/hr) for boiling (BYO gas bottle). Also includes: Chiller plate, 5000ml conical flask, stir plate with magnet, 10 meters of silicon food grade hosing, all with American high flow camlock fittings for easy connect and disconnect. Includes 6 plastic fermenters of various sizes and spare taps, etc. Includes refractometer, hydrometer, water filter, mash paddles, 90l stainless steel brew pot with electro etched volume makers, stainless steel false bottom and stainless ball valves. This system is a labour of love that four friends built together, and has a brew capacity of 50l. It's just about everything you need to make great beer.
Award winning wheat beer has been produced with this system, and it has been used to produce many hundreds of litres of excellent beer (including for two separate weddings). All equipment is in good working order, cleaned properly after every use and well maintained. This would make a magnificent all grain brewing system for a homebrewer, or a great pilot/test system for a brewery. Photos attached. We are happy to answer any questions, and show the buyer through the system.
Sold as a complete Kit. Pickup from Yarraville in Melbourne only.
Stainless bench not included, available for $100 extra.
Extra info:
System capable of 50 liters of Beer at up to 6% and of course less volume at higher percentage
Mash to Mash-out ramp time of 20mins
PID tuned for within 0.5 c of desired MASH temp
Includes:
1 Inline brew pump with stainless head 26 LPM
1 Full set 1/2" High Flow SS316 cam lock fittings Made USA
1 90 litre 304 stainless steel pot
1 High Pressure LPG burner (221 MJ/hr)
1 Portable refractometer with SG
1 Hydrometer
1 30 plate heat exchanger
1 Conical Flask 5 litre
1 Dome stainless steel false bottom
4 Half inch bsb stainless ball valve
1 HLT 2.4 kilowatt heating element
3 30 litre plastic fermenters
3 60 liter plastic fermentor
1 Stainless steel mash paddle 76 cm
1 Wooden mash paddle
1 Custom PWM Magnetic Stir plate
1 H.E.R.M-it HX Heat Exchange - 2.4kw
2 Stainless steel 50 liter kegs (H.L.T and MASH Tun)
1 Inline Carbon Water filter
1 Auber PID Controller 10amp for H.E.R.M.S
1 STC100 Temperature controller HLT
10 Meters 12.5 x 18.5 mm Food Grade - Silicon Hose
1 Set of USA made SS high Flow CamLock connectors
Attachments
Last edited:
