• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

FS : [MEL] Thermowells, ball lock QD's, temp controller, pump, mot

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

andytork

Well-Known Member
Joined
26/4/08
Messages
443
Reaction score
36
Going through the garage again, found lots of stuff again

(attached some generic pictures for the picture police) - All items are as seen / described


weldless thermowells,

I have 5 of the following, 100mm length (protrusion), 3/4" hole required
IMAG0176__Medium_.jpg

$35 each posted, or $25 pickup

Temp Controller

1 x temp controller, $20 Posted or $10 pickup
C1206-D.jpg

GAS QD MFL
5x threaded GAS QD , light use, $30 Posted or $20 pickup

qd-gas-mfl.jpg


BEER QD MFL
7x threaded BEER QD , light use, $40 Posted or $30 pickup

qd-beer-mfl.jpg

MAG DRIVE PUMP

Threaded mag drive pump with stainless hole tails, probably has under 2 hours use, it was my keg filling pump when doing tripple batches, $40 Posted or $30 pickup
.jpg


Motorised ball valves
4 of 5 wire, 1/2 full bore stainless $35 each posted, $25 pickup

5wirevalve.jpg

As stated, any item can be picked up from Boronia, I work around Hawthorn East so can arrange collect / meeting there

Andy
 
Hi, interested in the motorised ball valves. Can you please send the make/model of these.

PM about the thermowells.
 
Pm'd re: pump & 1x thermowell if available.
 
TerritoryBrew said:
Hi, interested in the motorised ball valves. Can you please send the make/model of these.

PM about the thermowells.

The ball valves : I imported them a while ago, used them on my automated brewery, I had to buy 10, these are the leftovers

Basically 5 wire,

2 for motor and 3 for the position sensor, (open / closed / common)

They are 12 Volt DC versions, I used basic relay boards with arduiono for this

Sent message regarding thermowells too :)
 
Pump and a few thermowells now gone, still got a few thermowells

open to reasonable offers on the other stuff, will combine postage etc of course if you want more than one item
 
I'll grab the temp controller unit if still available and does heat and cool devices. I'm in the basin and available for pickup. Pm me
 
GNU said:
I'll grab the temp controller unit if still available and does heat and cool devices. I'm in the basin and available for pickup. Pm me
Message sent
 
Still got

2x thermowells
Most of the QD's left.

4x motorised ball valves

and just found a bag of of 14 x 40mm PTFE coated magnetic stir bars too , $30 for the bag posted
 
Still have the following, cleaning out as we are moving.

Thermowells
2 x Thermowells, $25 each posted

QD's
6 x Threaded Liquid QD's
2 x Barbed Liquid QD's
3x Threaded Gas QD's
4x Barbed Gas GD


15 In total , $50 posted for the lot, will include 10 or JQ fittings with these.

Stir Bars

Bag of 14 x 40mm PTFE coated magnetic stir bars - $30 Posted

Will do all of the above for $100 Posted or $90 Pickup Boronia Vic
 
Back
Top