This kit would suit someone wanting to try all-grain brewing with minimum $ outlay. It comprises the following items:
Location: Sth Gold Coast, Qld
Item condition description: All items are in working order but sold as is with not returns. The urn is getting on but as mentioned above was checked this morning. Similarly the gas burner is ageing but structurally sound (I'm just chucking this in at no cost). Fermenters have looked after - soaked in Nappy San after ferments and care taken not to scratch.
Price and price conditions: $300 (Prefer to sell the lot but if no-one wants it I will consider selling items separately).
Reason for selling: Loved brewing my beer but another hobby has taken priority.
Payment Methods: Cash - Pickup
Extra Info: I was able to produce some nice beer with this kit and found it good for learning the importance of timing, temperature, water balance, etc.
While the burner pumps out enough heat for a rolling boil it takes a while and is not the most vigorous. If you get the bug it would be the first thing to upgrade.
I use to use the temperature controller for for ferment fridge mainly but would hook the urn up to it during brewing to hold temp of the strike water.
Happy to answer any questions.
Pictures
- Hot water urn (Tested as working but no test and tag)
- 26L Esky Mash Tun with handmade copper drain (false bottom), 2 piece stainless tap, and cosies to maintain mash temperature
- 70L Stainless kettle with 3 piece stainless tap
- Gas burner (BBQ - runs hotter than you think) with fitting for 9 KG bottle
- Temperature controller (hot / cold) with two properly crimped tubes (from corny kegs) for submerging temp probe - this has been checked by an Appliance Repairer when it was wired up
- Refractometer
- Hydrometer (x2)
- Fermenters (x2) - think they're 30L
- Batch prime / bottling bucket - about 30L as well
- Fermenter heater
- Hop socket (jumbo size)
- 20L cube
- Bottle tree, capper, fillers, might have some caps somewhere
- Various air locks, taps, o-rings
Location: Sth Gold Coast, Qld
Item condition description: All items are in working order but sold as is with not returns. The urn is getting on but as mentioned above was checked this morning. Similarly the gas burner is ageing but structurally sound (I'm just chucking this in at no cost). Fermenters have looked after - soaked in Nappy San after ferments and care taken not to scratch.
Price and price conditions: $300 (Prefer to sell the lot but if no-one wants it I will consider selling items separately).
Reason for selling: Loved brewing my beer but another hobby has taken priority.
Payment Methods: Cash - Pickup
Extra Info: I was able to produce some nice beer with this kit and found it good for learning the importance of timing, temperature, water balance, etc.
While the burner pumps out enough heat for a rolling boil it takes a while and is not the most vigorous. If you get the bug it would be the first thing to upgrade.
I use to use the temperature controller for for ferment fridge mainly but would hook the urn up to it during brewing to hold temp of the strike water.
Happy to answer any questions.
Pictures
