G'day all, considering selling my 71 litre Cheeky Peak SS pot since the layout doesn't really suit my current brewstand. Looking for $130 to make it worthwhile, if no-one's interested at that price I'll have a workshop alter some of the hole locations for me and keep using it.
Single-base 304 SS with 1.2 mm walls, volume etchings (not pictured) done by me are a little bit messy but do the job. As per the photos below it has 2x 34mm holes for 1" BSP elements, 3x holes down low for 1/2" BSP fittings, and a hole up top for a 1/2" BSP recirculation fitting. All holes are neat and de-burred. Since those photos were taken I've also added another hole - about 6mm from memory - for the matho's controller thermowell. I have a punch and can widen that hole to 1/2" BSP if preferred.
Note that it's only the pot (and lid) for sale - not the fittings - although I'm happy to throw in the 1/2" thermowell pictured if it's of use to someone.
Other than the bit of stone on the inside that I haven't cleaned off it's in perfect nick, had about eight brews through it so far.
Anyone interested? Located in Morningside QLD for those on mobile.
Cheers,
Lee.
Single-base 304 SS with 1.2 mm walls, volume etchings (not pictured) done by me are a little bit messy but do the job. As per the photos below it has 2x 34mm holes for 1" BSP elements, 3x holes down low for 1/2" BSP fittings, and a hole up top for a 1/2" BSP recirculation fitting. All holes are neat and de-burred. Since those photos were taken I've also added another hole - about 6mm from memory - for the matho's controller thermowell. I have a punch and can widen that hole to 1/2" BSP if preferred.
Note that it's only the pot (and lid) for sale - not the fittings - although I'm happy to throw in the 1/2" thermowell pictured if it's of use to someone.
Other than the bit of stone on the inside that I haven't cleaned off it's in perfect nick, had about eight brews through it so far.
Anyone interested? Located in Morningside QLD for those on mobile.
Cheers,
Lee.