hayden
Well-Known Member
- Joined
- 19/9/08
- Messages
- 338
- Reaction score
- 0
well i need some help with a font it's a T type font which supports glycol only it is used and the person who removed it from the bar cut the beer lines and glycol lines about 10-20 mm from the bottom of the font, just curious if i can dismantle the whole lot and run new lines through it or if its pretty much buggered.
![WP_000128.jpg](https://proxy.imagearchive.com/165/1654f6d4a2aa1b94cade156a5a467dae.jpg)
![WP_000130.jpg](https://proxy.imagearchive.com/432/4329f9fda1ac764dd7d862d2950f6a61.jpg)