Equipment For Sale Canberra - corny kegs $50 plus some free bits and bobs

[bduza]

I need to downsize, have a bunch of stuff that came from another person but I've never had the space to use it properly. I just want to convert some of it to money so I can buy some smaller kit (an oxebar keg setup, and a few other bits and pieces to do small batch brewing).
Location is North side of Canberra.
If you want anything posted you have to organise the courier.

Selling

• $200 Keezer with 3 taps, details :
• $50ea 4 x ball lock corny kegs (3/4 left)
• $50ea 2 x pin lock corny kegs (2/2 left)

Free (anything unclaimed will be scrapped):

• old powers bitter tap for restoration
• plate chiller (needs a clean, has camlocks, hoses and magnetic drive pump)
• gas burner
• glass fermenter for wine or maybe souring beer
• 2 x bottle cappers (only got a pic of one, but they're almost identical)
• large aluminium boil pot. I have the fitting for the hole at the bottom (angle + thread + tap + camlock)
• another large aluminium pot, but it has holes everywhere and corrosion. Pretty sure it was a HLT in a HERMS system.
• home made distiller in a kmart 15L pot+lid? Not sure what this is

 

[bduza]

keezer sold

 

[AHB_Admin]

Good luck with the sale!

 

[iamacup]

Hi, I’d be interested in the burner and large alu pot with fittings. Maybe a few of the other bits, too.
I’ll send you a PM

 

[David Grace]

I need to downsize, have a bunch of stuff that came from another person but I've never had the space to use it properly. I just want to convert some of it to money so I can buy some smaller kit (an oxebar keg setup, and a few other bits and pieces to do small batch brewing).
Location is North side of Canberra.
If you want anything posted you have to organise the courier.

Selling

• $200 Keezer with 3 taps, details:
  • temp controller
  • fan for cooling the font
  • one tap a little sticky, not sure if it needs a clean or new spring
  • turned it on for 30 mins, measured temp at -17C so it's still working great
  • photos in reply below as I hit the limit.

• $50ea 6 x corny kegs in good condition, mixture of ball and pin lock

View attachment 122716




Free (anything unclaimed will be scrapped):

• old powers bitter tap for restoration
• plate chiller (needs a clean, has camlocks, hoses and magnetic drive pump)
• gas burner
• glass fermenter for wine or maybe souring beer
• 2 x bottle cappers (only got a pic of one, but they're almost identical)
• large aluminium boil pot. I have the fitting for the hole at the bottom (angle + thread + tap + camlock)
• another large aluminium pot, but it has holes everywhere and corrosion. Pretty sure it was a HLT in a HERMS system.
• home made distiller in a kmart 15L pot+lid? Not sure what this is

View attachment 122721View attachment 122720View attachment 122715View attachment 122714View attachment 122722View attachment 122717View attachment 122712

I need to downsize, have a bunch of stuff that came from another person but I've never had the space to use it properly. I just want to convert some of it to money so I can buy some smaller kit (an oxebar keg setup, and a few other bits and pieces to do small batch brewing).
Location is North side of Canberra.
If you want anything posted you have to organise the courier.

Selling

• $200 Keezer with 3 taps, details:
  • temp controller
  • fan for cooling the font
  • one tap a little sticky, not sure if it needs a clean or new spring
  • turned it on for 30 mins, measured temp at -17C so it's still working great
  • photos in reply below as I hit the limit.

• $50ea 6 x corny kegs in good condition, mixture of ball and pin lock

View attachment 122716




Free (anything unclaimed will be scrapped):

• old powers bitter tap for restoration
• plate chiller (needs a clean, has camlocks, hoses and magnetic drive pump)
• gas burner
• glass fermenter for wine or maybe souring beer
• 2 x bottle cappers (only got a pic of one, but they're almost identical)
• large aluminium boil pot. I have the fitting for the hole at the bottom (angle + thread + tap + camlock)
• another large aluminium pot, but it has holes everywhere and corrosion. Pretty sure it was a HLT in a HERMS system.
• home made distiller in a kmart 15L pot+lid? Not sure what this is

View attachment 122721View attachment 122720View attachment 122715View attachment 122714View attachment 122722View attachment 122717View attachment 122712

if the plate chiller is still available, I'd be interested.

 

[bduza]

if the plate chiller is still available, I'd be interested.

Sorry mate, someone grabbed that last night.
I've marked that off in the first post.