Brew Rig Options

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hey Guys,

Had a very constructive day yesterday.
My Brother and Myself Part own a Timber Mill so we spent the day cutting lining for my shed/brewery and a bar top. I know It doesn't help to get the brewery going but still had to be done.

trailer_edited_1.jpgcutting.jpg
 
Cmon Jonothan, time to focus solely on getting this brewery making beer fella!

We are eagerly awaiting to see photos of it in action! :icon_cheers:
 
STILL LOOKING FOR FERMENTERS!!
300L commercial grade and fairly cheap, well not $6000 like I was quoted..
Cheers,
Jono.

you could triple batch into a 1,000L IBC - no chill FTW!. comes with an cage...just chill it in your lake?

you would need a big knee pad to push against the side to get all the air out
 
I hate you even more now :D

That's a decent tree how'd you get it?
That's 1 of 50 logs in a row, we take the mill to location , in this case a mates farm he has cleared a wind row with a dozer so our job is easy.
 
Hey Guys,
I've been quite lately but been very busy renovating my house, in between jobs the brewery/bar gets some attention.
Here's some pics of my progress..

281229_10150724799045187_710495186_19877714_2745363_n.jpg
281810_10150724799425187_710495186_19877715_8381497_n.jpg
285385_10150724799680187_710495186_19877717_19909_n.jpg
229599_10150749537150187_710495186_20204913_6087880_n.jpg
262575_10150749537430187_710495186_20204915_7667807_n.jpg
300655_10150769474615187_710495186_20460970_3603830_n.jpg
325111_10150786744760187_710495186_20661641_7236576_o.jpg
330635_10150788155520187_710495186_20675657_3315544_o.jpg

Cheers...
 
looks great! you dont see pitched roofs much lately. Whats the rafters made of dont seem to big but could be the photo and whats the pitching beam made of hard to see in photos to. My shed its pitched roof and I dunno how it hasnt fallen down as the rafter spacings are like 2500mm lol got on there once to seal hole in the second hand iron and it was a massive stride and a steady step in the middle lol. At least the pool table wont get wet :p
 
good shi-stuff got to get myself a block soon. :icon_drool2:
 
Cheers,
I wanted to keep the pitch, otherwise its a waste of space. The shed is a typical colorbond with C section trusses and top hat, I used a truck load of cypress to square the shed up to plaster it, 60 x 35 was used at 500mm centers for the studs and rafters. The pitching beam is 250 x 35 cypress with a 100 x 35 on each side, hard to explain but was needed to build it out to make a corner for the wall - ceiling plaster join.
All in all It would have been faster to stud wall the whole shed inside than trying to screw to the tophat.
 
Shh.. haha
soon..

Ran the 10mm2 mains this week so I can plug her in..

We have heard all before bro! :p

If my mohawk grew back before I ran up my [perfectly built] brewery, I would surely make the effort to brew a beer!

Dude... please!

BREW! PIX! BEER! Sorted...

GO!
 
Mate, I know it, you think my mates down here don't give me hell about it daily, luckily with my new location 3 doors down from our local, I tell them where to go... now with a suitable power supply things are looking good.
 
Mate, I know it, you think my mates down here don't give me hell about it daily, luckily with my new location 3 doors down from our local, I tell them where to go... now with a suitable power supply things are looking good.

I know bro, 4 years of waiting.. Meh!

Good to see you posting again at least...

where you been, aussiehomefabricating.com? fair enough...

Now brew you fark!

BTW: Well done on the gaff! :kooi:
 
Don't look for beer Fermenters..Johno....
Big wine Fermenters are cheaper.....
Same thing ...but cheaper....
That advice comes from a small commercial brewing company..
Cheers
PJ
 
Don't look for beer Fermenters..Johno....
Big wine Fermenters are cheaper.....
Same thing ...but cheaper....
That advice comes from a small commercial brewing company..
Cheers
PJ

Hey Pj,
Yeah some are the same but i've found any that have conical bottoms and are jacketed are a similar price. There are alot of smaller non jacketed ones around though so they may be an option.
Cheers
 

Latest posts

Back
Top