Brew Gear for sale: Melbourne

[geoffd]

Im interested in the sink unit. Is it still available?

Sure, top also separates from legs for ease of transport
PM me if you want to arrange to come & look at it.

 

[manticle]

Lot 1

AG Set up complete:
$1700 the lot (estimated value $2400)

Winter Brew Box thermostat & head pad
Grain Mill: Barley Crusher with large 7lb hopper : Manticle
Bottle Drying Rack & S/s Drip tray
20L fermenter with stick on thermometer
28L fermenter with stick on thermometer 30L fermenter with stick on thermometer
5L glass demijohn with stick on thermometer : Manticle
6 Wheelie Tubs full of bottles + more bottles (total circa 300)
20L: HLT pail, lagging jacket & tap
20L lauter tun, lagging jacket, tap, false bottom
4 ring burner, regulator, swap & go gas cylinder (Yob)
20L s/s mash tun (6mm base - alu diffuser sandwiched)
36L s/s boiler, welded outlet, s/s pick up, s/s valve, tail also similar base to 20L pot : manticle
0.00-200.00 hop scales
Refractometer
Hydrometer
Ph Meter + calibrating solutions
Rotating sparge arm
Hand held element 2200w: Manticle
thermostat & timer plug
Box of brewing salts (opened 1kg bags) + storage box
Dextrose 8.5 x 1kg bags
s/s air stone & aeration pump (Yob)
Immersion Chiller & hoses - Philmud
Lever caper (free held) does all bottle sizes without adjusting, better than the bench capper & quicker
3 x 1kg LDME
Various chemicals, fittings, bungs, seals, starter bottles, other pieces of equipment



Lot 2

Brewfridge & Timber Shed with colourbond roof $1500
shed is ideal for storing brewfridge & brewgear

2 sockets fitted, sisolation in roof to reflect heat in summer, shelves on one side, space for brewfridge on the other, has its own floor, has always been placed on pallets so foundation has never been sitting in rain puddles. in excellent condition, was painted to protect, not one board has warped in it, easy to dissassemble.

Lot 3

Kegerator 2 tap + 1 keg + fittings + gas cylinder + pluto gun
This has only been used once (half a keg), as good as new & with the convenience of being plumbed up. RRP $1082 at G&G - $850 wanted
I have a second keg, but it is in the possession of a friend down the end of mornington peninsula

Lot 4

brand new double sink, new mixer tap with veggie sprayer, 25 meters of hot & cold high pressure hose, fittings, valves taps, line clips, pipe cutters. : Cosmic Bertie

 

[Charst]

Lot 1

AG Set up complete:
$1700 the lot (estimated value $2400)

Winter Brew Box thermostat & head pad
Grain Mill: Barley Crusher with large 7lb hopper : Manticle
Bottle Drying Rack & S/s Drip tray
20L fermenter with stick on thermometer
28L fermenter with stick on thermometer 30L fermenter with stick on thermometer
5L glass demijohn with stick on thermometer : Manticle
6 Wheelie Tubs full of bottles + more bottles (total circa 300)
20L: HLT pail, lagging jacket & tap
20L lauter tun, lagging jacket, tap, false bottom
4 ring burner, regulator, swap & go gas cylinder (Yob)
20L s/s mash tun (6mm base - alu diffuser sandwiched)
36L s/s boiler, welded outlet, s/s pick up, s/s valve, tail also similar base to 20L pot : manticle
0.00-200.00 hop scales
Refractometer
Hydrometer
Ph Meter + calibrating solutions
Rotating sparge arm Charst
Hand held element 2200w: Manticle
thermostat & timer plug
Box of brewing salts (opened 1kg bags) + storage box
Dextrose 8.5 x 1kg bags
s/s air stone & aeration pump (Yob)
Immersion Chiller & hoses - Philmud
Lever caper (free held) does all bottle sizes without adjusting, better than the bench capper & quicker
3 x 1kg LDME
Various chemicals, fittings, bungs, seals, starter bottles, other pieces of equipment



Lot 2

Brewfridge & Timber Shed with colourbond roof $1500
shed is ideal for storing brewfridge & brewgear

2 sockets fitted, sisolation in roof to reflect heat in summer, shelves on one side, space for brewfridge on the other, has its own floor, has always been placed on pallets so foundation has never been sitting in rain puddles. in excellent condition, was painted to protect, not one board has warped in it, easy to dissassemble.

Lot 3

Kegerator 2 tap + 1 keg + fittings + gas cylinder + pluto gun
This has only been used once (half a keg), as good as new & with the convenience of being plumbed up. RRP $1082 at G&G - $850 wanted
I have a second keg, but it is in the possession of a friend down the end of mornington peninsula

Lot 4

brand new double sink, new mixer tap with veggie sprayer, 25 meters of hot & cold high pressure hose, fittings, valves taps, line clips, pipe cutters. : Cosmic Bertie

 

[MartinOC]

Lot 1

AG Set up complete:
$1700 the lot (estimated value $2400)

Winter Brew Box thermostat & head pad
Grain Mill: Barley Crusher with large 7lb hopper : Manticle
Bottle Drying Rack & S/s Drip tray
20L fermenter with stick on thermometer
28L fermenter with stick on thermometer 30L fermenter with stick on thermometer
5L glass demijohn with stick on thermometer : Manticle
6 Wheelie Tubs full of bottles + more bottles (total circa 300)
20L: HLT pail, lagging jacket & tap
20L lauter tun, lagging jacket, tap, false bottom
4 ring burner, regulator, swap & go gas cylinder (Yob)
20L s/s mash tun (6mm base - alu diffuser sandwiched)
36L s/s boiler, welded outlet, s/s pick up, s/s valve, tail also similar base to 20L pot : manticle
0.00-200.00 hop scales
Refractometer (MartinOC)
Hydrometer
Ph Meter + calibrating solutions
Rotating sparge arm Charst
Hand held element 2200w: Manticle
thermostat & timer plug
Box of brewing salts (opened 1kg bags) + storage box
Dextrose 8.5 x 1kg bags
s/s air stone & aeration pump (Yob)
Immersion Chiller & hoses - Philmud
Lever caper (free held) does all bottle sizes without adjusting, better than the bench capper & quicker
3 x 1kg LDME
Various chemicals, fittings, bungs, seals, starter bottles, other pieces of equipment



Lot 2

Brewfridge & Timber Shed with colourbond roof $1500
shed is ideal for storing brewfridge & brewgear

2 sockets fitted, sisolation in roof to reflect heat in summer, shelves on one side, space for brewfridge on the other, has its own floor, has always been placed on pallets so foundation has never been sitting in rain puddles. in excellent condition, was painted to protect, not one board has warped in it, easy to dissassemble.

Lot 3

Kegerator 2 tap + 1 keg + fittings + gas cylinder + pluto gun
This has only been used once (half a keg), as good as new & with the convenience of being plumbed up. RRP $1082 at G&G - $850 wanted
I have a second keg, but it is in the possession of a friend down the end of mornington peninsula

Lot 4

brand new double sink, new mixer tap with veggie sprayer, 25 meters of hot & cold high pressure hose, fittings, valves taps, line clips, pipe cutters. : Cosmic Bertie

 

[micbrew]

Lot 1

AG Set up complete:
$1700 the lot (estimated value $2400)

Winter Brew Box thermostat & head pad micbrew interested in (heating pad only)
Grain Mill: Barley Crusher with large 7lb hopper : Manticle
Bottle Drying Rack & S/s Drip tray
20L fermenter with stick on thermometer
28L fermenter with stick on thermometer 30L fermenter with stick on thermometer
5L glass demijohn with stick on thermometer : Manticle
6 Wheelie Tubs full of bottles + more bottles (total circa 300)
20L: HLT pail, lagging jacket & tap
20L lauter tun, lagging jacket, tap, false bottom
4 ring burner, regulator, swap & go gas cylinder (Yob)
20L s/s mash tun (6mm base - alu diffuser sandwiched)
36L s/s boiler, welded outlet, s/s pick up, s/s valve, tail also similar base to 20L pot : manticle
0.00-200.00 hop scales
Refractometer
Hydrometer
Ph Meter + calibrating solutions
Rotating sparge arm
Hand held element 2200w: Manticle
thermostat & timer plug
Box of brewing salts (opened 1kg bags) + storage box
Dextrose 8.5 x 1kg bags
s/s air stone & aeration pump (Yob)
Immersion Chiller & hoses - Philmud
Lever caper (free held) does all bottle sizes without adjusting, better than the bench capper & quicker
3 x 1kg LDME
Various chemicals, fittings, bungs, seals, starter bottles, other pieces of equipment



Lot 2

Brewfridge & Timber Shed with colourbond roof $1500
shed is ideal for storing brewfridge & brewgear

2 sockets fitted, sisolation in roof to reflect heat in summer, shelves on one side, space for brewfridge on the other, has its own floor, has always been placed on pallets so foundation has never been sitting in rain puddles. in excellent condition, was painted to protect, not one board has warped in it, easy to dissassemble.

Lot 3

Kegerator 2 tap + 1 keg + fittings + gas cylinder + pluto gun
This has only been used once (half a keg), as good as new & with the convenience of being plumbed up. RRP $1082 at G&G - $850 wanted
I have a second keg, but it is in the possession of a friend down the end of mornington peninsula

Lot 4

brand new double sink, new mixer tap with veggie sprayer, 25 meters of hot & cold high pressure hose, fittings, valves taps, line clips, pipe cutters.

I was originally thinking we might hopefully be able to work out what is fair amongst ourselves but I may actually go round to Father Jack's place and work out a decent estimate/breakdown and I'll post it here.

Just trying to make it easier on a guy who has had to stop brewing despite being a very good brewer and not ready to give up the game. At this point, if you put your name down, you are part of a collective interested in a split - name down without an individual price can't be expected to be a committed buyer just yet.

Might be a slightly lengthy process but the gear has been for sale and not moved for a while.

Hope that makes sense - open to other suggestions.

Lot 1

AG Set up complete:
$1700 the lot (estimated value $2400)

Winter Brew Box thermostat & head pad
[SIZE=medium]Grain Mill: Barley Crusher with large 7lb hopper[/SIZE] : Manticle
[SIZE=medium]Bottle Drying Rack & S/s Drip tray[/SIZE]
[SIZE=medium]20L fermenter with stick on thermometer[/SIZE]
[SIZE=medium]28L fermenter with stick on thermometer[/SIZE] [SIZE=medium]30L fermenter with stick on thermometer[/SIZE]
[SIZE=medium]5L glass demijohn with stick on thermometer[/SIZE] : Manticle
[SIZE=medium]6 Wheelie Tubs full of bottles + more bottles (total circa 300)[/SIZE]
[SIZE=medium]20L: HLT pail, lagging jacket & tap[/SIZE]
[SIZE=medium]20L lauter tun, lagging jacket, tap, false bottom[/SIZE]
[SIZE=medium]4 ring burner, regulator, swap & go gas cylinder[/SIZE]
[SIZE=medium]20L s/s mash tun (6mm base - alu diffuser sandwiched)[/SIZE]
[SIZE=medium]36L s/s boiler, welded outlet, s/s pick up, s/s valve, tail also similar base to 20L pot[/SIZE] : manticle
[SIZE=medium]0.00-200.00 hop scales[/SIZE]
[SIZE=medium]Refractometer[/SIZE]
[SIZE=medium]Hydrometer[/SIZE]
[SIZE=medium]Ph Meter + calibrating solutions[/SIZE]
[SIZE=medium]Rotating sparge arm[/SIZE]
[SIZE=medium]Hand held element 2200w: Manticle[/SIZE]
[SIZE=medium]thermostat & timer plug[/SIZE]
[SIZE=medium]Box of brewing salts (opened 1kg bags) + storage box[/SIZE]
[SIZE=medium]Dextrose 8.5 x 1kg bags[/SIZE]
[SIZE=medium]s/s air stone & aeration pump[/SIZE]
[SIZE=medium]Immersion Chiller & hoses[/SIZE] [SIZE=medium]Lever caper (free held) does all bottle sizes without adjusting, better than the bench capper & quicker[/SIZE]
[SIZE=medium]3 x 1kg LDME[/SIZE]
[SIZE=medium]Various chemicals, fittings, bungs, seals, starter bottles, other pieces of equipment[/SIZE]



Lot 2

Brewfridge & Timber Shed with colourbond roof $1500
shed is ideal for storing brewfridge & brewgear

2 sockets fitted, sisolation in roof to reflect heat in summer, shelves on one side, space for brewfridge on the other, has its own floor, has always been placed on pallets so foundation has never been sitting in rain puddles. in excellent condition, was painted to protect, not one board has warped in it, easy to dissassemble.

Lot 3

Kegerator 2 tap + 1 keg + fittings + gas cylinder + pluto gun
This has only been used once (half a keg), as good as new & with the convenience of being plumbed up. RRP $1082 at G&G - $850 wanted
I have a second keg, but it is in the possession of a friend down the end of mornington peninsula

Lot 4

brand new double sink, new mixer tap with veggie sprayer, 25 meters of hot & cold high pressure hose, fittings, valves taps, line clips, pipe cutters.

 

[geoffd]

Micbrew: the heatpad has been wired into the thermostat,

the few bits of wood avid direct contact with the heat pad & the bottom of the fermenter, so its just heating the air space around the fermenter

would be easier to fix the lid of the box & turn one of the sides into a door, can still be done.

if someone wants the box without the heatpad, then all good

 

[micbrew]

ive just wired up my fridge with stc 1000 and now require heat pad ...
space is critical at my place . not sure I can accommodate the box .... but could give it a go I suppose
thanks for the photos
pm me a price if that's ok

 

[DU99]

Yob another gas burner...

 

[Yob]

I like to spare up.. My brewstand was cut to fit a 4 ring so seems appropriate, if I upgrade my kettle I'll be sorted instantly… and it helps out a bit

 

[CosmicBertie]

Sorry, but I'm going to have to pass on the sink unit. Space is tight, and I'm moving house.

Really smart setup though FJ. I hope you find solace.

CB

 

[manticle]

Posted 09 July 2013 - 02:40 PM

Lot 1

AG Set up complete:
$1700 the lot (estimated value $2400)

Winter Brew Box thermostat & head pad
Grain Mill: Barley Crusher with large 7lb hopper : Manticle
Bottle Drying Rack & S/s Drip tray
20L fermenter with stick on thermometer
28L fermenter with stick on thermometer 30L fermenter with stick on thermometer
5L glass demijohn with stick on thermometer : Manticle
6 Wheelie Tubs full of bottles + more bottles (total circa 300)
20L: HLT pail, lagging jacket & tap
20L lauter tun, lagging jacket, tap, false bottom
4 ring burner, regulator, swap & go gas cylinder (Yob)
20L s/s mash tun (6mm base - alu diffuser sandwiched)
36L s/s boiler, welded outlet, s/s pick up, s/s valve, tail also similar base to 20L pot : manticle
0.00-200.00 hop scales
Refractometer (MartinOC)
Hydrometer
Ph Meter + calibrating solutions
Rotating sparge arm Charst
Hand held element 2200w: Manticle
thermostat & timer plug
Box of brewing salts (opened 1kg bags) + storage box
Dextrose 8.5 x 1kg bags
s/s air stone & aeration pump (Yob)
Immersion Chiller & hoses - Philmud
Lever caper (free held) does all bottle sizes without adjusting, better than the bench capper & quicker
3 x 1kg LDME
Various chemicals, fittings, bungs, seals, starter bottles, other pieces of equipment



Lot 2

Brewfridge & Timber Shed with colourbond roof $1500
shed is ideal for storing brewfridge & brewgear

2 sockets fitted, sisolation in roof to reflect heat in summer, shelves on one side, space for brewfridge on the other, has its own floor, has always been placed on pallets so foundation has never been sitting in rain puddles. in excellent condition, was painted to protect, not one board has warped in it, easy to dissassemble.

Lot 3

Kegerator 2 tap + 1 keg + fittings + gas cylinder + pluto gun
This has only been used once (half a keg), as good as new & with the convenience of being plumbed up. RRP $1082 at G&G - $850 wanted


Lot 4

brand new double sink, new mixer tap with veggie sprayer, 25 meters of hot & cold high pressure hose, fittings, valves taps, line clips, pipe cutters. :

 

[slcmorro]

Posted 09 July 2013 - 02:40 PM

Lot 1

AG Set up complete:
$1700 the lot (estimated value $2400)

Winter Brew Box thermostat & head pad slcmorro
Grain Mill: Barley Crusher with large 7lb hopper : Manticle
Bottle Drying Rack & S/s Drip tray
20L fermenter with stick on thermometer
28L fermenter with stick on thermometer slcmorro
30L fermenter with stick on thermometer slcmorro
5L glass demijohn with stick on thermometer : Manticle
6 Wheelie Tubs full of bottles + more bottles (total circa 300)
20L: HLT pail, lagging jacket & tap
20L lauter tun, lagging jacket, tap, false bottom
4 ring burner, regulator, swap & go gas cylinder (Yob)
20L s/s mash tun (6mm base - alu diffuser sandwiched)
36L s/s boiler, welded outlet, s/s pick up, s/s valve, tail also similar base to 20L pot : manticle
0.00-200.00 hop scales
Refractometer (MartinOC)
Hydrometer
Ph Meter + calibrating solutions
Rotating sparge arm Charst
Hand held element 2200w: Manticle
thermostat & timer plug
Box of brewing salts (opened 1kg bags) + storage box
Dextrose 8.5 x 1kg bags slcmorro
s/s air stone & aeration pump (Yob)
Immersion Chiller & hoses - Philmud
Lever caper (free held) does all bottle sizes without adjusting, better than the bench capper & quicker
3 x 1kg LDME slcmorro
Various chemicals, fittings, bungs, seals, starter bottles, other pieces of equipment



Lot 2

Brewfridge & Timber Shed with colourbond roof $1500
shed is ideal for storing brewfridge & brewgear

2 sockets fitted, sisolation in roof to reflect heat in summer, shelves on one side, space for brewfridge on the other, has its own floor, has always been placed on pallets so foundation has never been sitting in rain puddles. in excellent condition, was painted to protect, not one board has warped in it, easy to dissassemble.

Lot 3

Kegerator 2 tap + 1 keg + fittings + gas cylinder + pluto gun
This has only been used once (half a keg), as good as new & with the convenience of being plumbed up. RRP $1082 at G&G - $850 wanted


Lot 4

brand new double sink, new mixer tap with veggie sprayer, 25 meters of hot & cold high pressure hose, fittings, valves taps, line clips, pipe cutters. :

 

[Midnight Brew]

Hahaha too slow was figuring out what I wanted and slcmorro got in before me.

 

[slcmorro]

You snooze, you lose!

 

[Acasta]

Posted 09 July 2013 - 02:40 PM

Lot 1

AG Set up complete:
$1700 the lot (estimated value $2400)

Winter Brew Box thermostat & head pad slcmorro
Grain Mill: Barley Crusher with large 7lb hopper : Manticle
Bottle Drying Rack & S/s Drip tray
20L fermenter with stick on thermometer
28L fermenter with stick on thermometer slcmorro
30L fermenter with stick on thermometer slcmorro
5L glass demijohn with stick on thermometer : Manticle
6 Wheelie Tubs full of bottles + more bottles (total circa 300)
20L: HLT pail, lagging jacket & tap
20L lauter tun, lagging jacket, tap, false bottom
4 ring burner, regulator, swap & go gas cylinder (Yob)
20L s/s mash tun (6mm base - alu diffuser sandwiched)
36L s/s boiler, welded outlet, s/s pick up, s/s valve, tail also similar base to 20L pot : manticle
0.00-200.00 hop scales
Refractometer (MartinOC)
Hydrometer
Ph Meter + calibrating solutions acasta
Rotating sparge arm Charst
Hand held element 2200w: Manticle
thermostat & timer plug
Box of brewing salts (opened 1kg bags) + storage box
Dextrose 8.5 x 1kg bags slcmorro
s/s air stone & aeration pump (Yob)
Immersion Chiller & hoses - Philmud
Lever caper (free held) does all bottle sizes without adjusting, better than the bench capper & quicker
3 x 1kg LDME slcmorro
Various chemicals, fittings, bungs, seals, starter bottles, other pieces of equipment



Lot 2

Brewfridge & Timber Shed with colourbond roof $1500
shed is ideal for storing brewfridge & brewgear

2 sockets fitted, sisolation in roof to reflect heat in summer, shelves on one side, space for brewfridge on the other, has its own floor, has always been placed on pallets so foundation has never been sitting in rain puddles. in excellent condition, was painted to protect, not one board has warped in it, easy to dissassemble.

Lot 3

Kegerator 2 tap + 1 keg + fittings + gas cylinder + pluto gun
This has only been used once (half a keg), as good as new & with the convenience of being plumbed up. RRP $1082 at G&G - $850 wanted acasta - kegs if available still


Lot 4

brand new double sink, new mixer tap with veggie sprayer, 25 meters of hot & cold high pressure hose, fittings, valves taps, line clips, pipe cutters. :

Depending on prices.

 

[manticle]

I will post up prices and maybe some extra pics in the next couple of days.
Acasta - the keg is part of the kegerator, price as stated unless you know someone who wants the kegerator but not the keg.
It's mainly the AG system and bits and bobs getting split, kind of like a bulk buy.

 

[manticle]

Been having some incredibly irritating computer issues and the pc doctor has done nothing to fix them. I started to list prices and they got eatenby whatever has bugged the laptop.
So - I will post up a full list tomorrow at work but if any interested parties need a price before then, pm me and I'll let you know. Gear is all in great nick.

Posting quoted lists on a phone drives me bananas.

 

[leahy268]

Been having some incredibly irritating computer issues and the pc doctor has done nothing to fix them. I started to list prices and they got eatenby whatever has bugged the laptop.
So - I will post up a full list tomorrow at work but if any interested parties need a price before then, pm me and I'll let you know. Gear is all in great nick.

Posting quoted lists on a phone drives me bananas.

Dude shoulda just asked the community. I'm a tech... would have happily logged in remotely to fix the computer for you....

 

[djar007]

As a tech you would know the cause. And manticles reluctance to outsource for help. Lol.

 

[manticle]

Dude shoulda just asked the community. I'm a tech... would have happily logged in remotely to fix the computer for you....

Such a big thing to ask people to fix your computer for free.
I need to take it back to the guy we paid and get what we paid for or a refund but if it doesn't work out I'll post in a separate topic.