washulookinat
Member
- Joined
- 30/4/08
- Messages
- 21
- Reaction score
- 0
Had enough of AG so selling some of my gear. I would prefer pick ups but if that is not possible i can post. Prices don't include postage, if your interested in an item I can find out postage costs for you. I am using a crappy old computer at the moment that decides when i can and can't use it, i will try and answer questions and what not as soon as i can.
Marga mill modified. The drive slots are a little worn toward the outside (screwdriver incident) has been driven by dyna bolt lately the handle still slots in and works. Included is all original stuff in the marga box.$60
![Marga.JPG Marga.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28350-4cecb2d83bd9b76365163b5f668f3c87.jpg)
Round Cooler 36 Lt "Keep Cold" from BCF. The lid has been injected with expander foam, the outer plastic hole has been made bigger so the original tap and bulkhead don't fit as snug as they did new. $40
![Mash_tun.JPG Mash_tun.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28351-ded61947a5ab924d906658f0fdf6bc8e.jpg)
Below is the set up i was running with a valve located on the brew stand itself.
![Tun_set_up.JPG Tun_set_up.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28365-d1b772913bc14db5b8a5c95df5e32dfc.jpg)
Bulkheads Stainless X2 Beerbelly 75mm. $20 each.
![Bulkheads.JPG Bulkheads.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28352-5984fc0c82fc046deffcb0b17cf962fb.jpg)
Ball Valves inch 2 Piece Stainless X2 $20 for both
![2_P_Valves.JPG 2_P_Valves.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28353-bc4659f049017bfa0c0f27a1800972e1.jpg)
Barbed fittings and sleeve, Stainless X3 $10 for all 4.
![Fittings.JPG Fittings.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28354-17a0b54c8e6b4117905252c8c9ce3572.jpg)
False bottom 9 inch w/original fittings. $30
![9_Inch_false_bottom.JPG 9_Inch_false_bottom.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28355-aa9e2498de8b4ba815cc7baf67942228.jpg)
Custom False bottom base plate made from 304 SS 2mm, 9.5 inch. Dia. (Plus nipple fitting) $40
![Base_plate_01.JPG Base_plate_01.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28356-ec88bf7cb9d8c72521e2fc2ebdb32bca.jpg)
THE ABOVE TWO ITEMS (FALSE BOTTOM + BASE PLATE) CAN BE SOLD TOGETHER FOR $60
Below is some pictures of how I had the false bottom and base plate set up, it was in an attempt to reduce any channeling that might occur around the edge of the false bottom. The dodgy copper pipe is not included (I think i threw it out cleaning the garage, but its not hard to bend one up(with the right size pipe bender
), just leave a notch cut out of the end that goes onto the base plate.
![Base_plate_set_up.JPG Base_plate_set_up.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28358-2dbe30ea896e791a8ac1abe86da821d6.jpg)
![Base_plate_set_up_2.JPG Base_plate_set_up_2.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28357-6f0f1aa658af47f2ebb5e74408f5ff42.jpg)
Stock Pot w/lid, Aluminium 60 Lt. 20-21mm hole drilled for bulkhead fitting. $70
![60_Lt_Kettle.JPG 60_Lt_Kettle.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28359-1d9e66eac50a2aa6f4e066ce4d14160b.jpg)
Mash Paddle give away, pick up only.
![Mash_paddle.JPG Mash_paddle.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28361-6f0eb898c8e7ecae5d095902ebdaf93f.jpg)
Tempmate in jiffy box (only the heating circuit has been wired). $50
![Tempmate_front.JPG Tempmate_front.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28363-7c92b7e78810f8a83a4c8b4180138cc9.jpg)
![Tempmate_back.JPG Tempmate_back.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28364-4d5c48abbc89333e2d7b2b6f7a8a9094.jpg)
Beerbelly counter flow chiller end pieces, suit 3/8 copper tubing (never got any further with this one). $15
![CFC_ends.JPG CFC_ends.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28360-5ea0f8ea0505a91ff505354d39179ea0.jpg)
Prost
Andrew
Marga mill modified. The drive slots are a little worn toward the outside (screwdriver incident) has been driven by dyna bolt lately the handle still slots in and works. Included is all original stuff in the marga box.$60
![Marga.JPG Marga.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28350-4cecb2d83bd9b76365163b5f668f3c87.jpg)
Round Cooler 36 Lt "Keep Cold" from BCF. The lid has been injected with expander foam, the outer plastic hole has been made bigger so the original tap and bulkhead don't fit as snug as they did new. $40
![Mash_tun.JPG Mash_tun.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28351-ded61947a5ab924d906658f0fdf6bc8e.jpg)
Below is the set up i was running with a valve located on the brew stand itself.
![Tun_set_up.JPG Tun_set_up.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28365-d1b772913bc14db5b8a5c95df5e32dfc.jpg)
Bulkheads Stainless X2 Beerbelly 75mm. $20 each.
![Bulkheads.JPG Bulkheads.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28352-5984fc0c82fc046deffcb0b17cf962fb.jpg)
Ball Valves inch 2 Piece Stainless X2 $20 for both
![2_P_Valves.JPG 2_P_Valves.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28353-bc4659f049017bfa0c0f27a1800972e1.jpg)
Barbed fittings and sleeve, Stainless X3 $10 for all 4.
![Fittings.JPG Fittings.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28354-17a0b54c8e6b4117905252c8c9ce3572.jpg)
False bottom 9 inch w/original fittings. $30
![9_Inch_false_bottom.JPG 9_Inch_false_bottom.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28355-aa9e2498de8b4ba815cc7baf67942228.jpg)
Custom False bottom base plate made from 304 SS 2mm, 9.5 inch. Dia. (Plus nipple fitting) $40
![Base_plate_01.JPG Base_plate_01.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28356-ec88bf7cb9d8c72521e2fc2ebdb32bca.jpg)
THE ABOVE TWO ITEMS (FALSE BOTTOM + BASE PLATE) CAN BE SOLD TOGETHER FOR $60
Below is some pictures of how I had the false bottom and base plate set up, it was in an attempt to reduce any channeling that might occur around the edge of the false bottom. The dodgy copper pipe is not included (I think i threw it out cleaning the garage, but its not hard to bend one up(with the right size pipe bender
![Base_plate_set_up.JPG Base_plate_set_up.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28358-2dbe30ea896e791a8ac1abe86da821d6.jpg)
![Base_plate_set_up_2.JPG Base_plate_set_up_2.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28357-6f0f1aa658af47f2ebb5e74408f5ff42.jpg)
Stock Pot w/lid, Aluminium 60 Lt. 20-21mm hole drilled for bulkhead fitting. $70
![60_Lt_Kettle.JPG 60_Lt_Kettle.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28359-1d9e66eac50a2aa6f4e066ce4d14160b.jpg)
Mash Paddle give away, pick up only.
![Mash_paddle.JPG Mash_paddle.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28361-6f0eb898c8e7ecae5d095902ebdaf93f.jpg)
Tempmate in jiffy box (only the heating circuit has been wired). $50
![Tempmate_front.JPG Tempmate_front.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28363-7c92b7e78810f8a83a4c8b4180138cc9.jpg)
![Tempmate_back.JPG Tempmate_back.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28364-4d5c48abbc89333e2d7b2b6f7a8a9094.jpg)
Beerbelly counter flow chiller end pieces, suit 3/8 copper tubing (never got any further with this one). $15
![CFC_ends.JPG CFC_ends.JPG](https://cdn.imagearchive.com/aussiehomebrewer/data/attachments/28/28360-5ea0f8ea0505a91ff505354d39179ea0.jpg)
Prost
Andrew