1/2" Bsp Tap/die Supplier In Adelaide?
- Thread starter brewerben
- Start date
Help Support Australia & New Zealand Homebrewing Forum:
Phoney
Well-Known Member
Reece plumbing?
dicko
Boston Bay Brewery
- Joined
- 11/1/04
- Messages
- 3,393
- Reaction score
- 578
Hi Ben,
This crowd has just about everything engineering.
http://www2.blackwoods.com.au/LocationsList.aspx?state=SA
Cheers
This crowd has just about everything engineering.
http://www2.blackwoods.com.au/LocationsList.aspx?state=SA
Cheers
Blackwoods.
Or if you have them over in SA try Thomas Warburtons.
Having said that I just checked a warburtons catalogue and no BSP taps appear - thats not to say they dont have them though.
What about total tools - they actually have a supprising amount of that kind of stuff!
Or if you have them over in SA try Thomas Warburtons.
Having said that I just checked a warburtons catalogue and no BSP taps appear - thats not to say they dont have them though.
What about total tools - they actually have a supprising amount of that kind of stuff!
Batz
Batz Brewery...Hand crafted beers from the 'Batcav
- Joined
- 8/8/03
- Messages
- 12,735
- Reaction score
- 1,421
Taps are quite expensive Ben, I know someone who would do it for you if need be.
Batz
Gout
Bentleigh Brau Haus
Ben i got mine from ebay - aus supply was very expensive so i bought it from the UK for something like $13 +$8 delivery - was here within the week.
have a look as i dont recall the details but i could not find anything close to this in aus. It may not be the best quality but did the job just fine for me
have a look as i dont recall the details but i could not find anything close to this in aus. It may not be the best quality but did the job just fine for me
DU99
Well-Known Member
did you look at ebay..or try local hardware..bunnings..Tony C has offered his
markws
Well-Known Member
- Joined
- 8/12/03
- Messages
- 255
- Reaction score
- 3
Dear All,
I found that I need to locate a 1/2" BSP tap to build my brew stand as I thought that my arc welding had warped the sockets that I was keen to attached to both the mash tun and boil kettle (in this case i was correct). i found on the internet a group in QLD call the tool exchange and the cost of a single 1/2" BSP (14P) P&N tap was $14 delivered to Perth. The service was prompt and the guy suggested (although not confirmed) that there were multiples available (alas no 1/2" bsp die's).
Hope this helps other out there - I am sure the cost of this type of product at the 'bunnings' of this world would of been in excess of a crisp $50 (cane toad!)
Any one in Perth or else where that need to borrow mine - pls PM me, it is now a relic of my tool cab!
cheers
MWS
I found that I need to locate a 1/2" BSP tap to build my brew stand as I thought that my arc welding had warped the sockets that I was keen to attached to both the mash tun and boil kettle (in this case i was correct). i found on the internet a group in QLD call the tool exchange and the cost of a single 1/2" BSP (14P) P&N tap was $14 delivered to Perth. The service was prompt and the guy suggested (although not confirmed) that there were multiples available (alas no 1/2" bsp die's).
Hope this helps other out there - I am sure the cost of this type of product at the 'bunnings' of this world would of been in excess of a crisp $50 (cane toad!)
Any one in Perth or else where that need to borrow mine - pls PM me, it is now a relic of my tool cab!
cheers
MWS
Similar threads
