What are you brewing 2025

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Dusted off the 3/4v Kit for a 66L batch (I use 11L cubes), I will be brewing 3-4 beers out of it as I currently don't need more then a keg of any beer (going to do Dry Jan and probably attempt to not drink till I go to Japan for a week start of March)

Base is a Mexican Lager Cartucho Cartridge brewing clone this is my 2nd time at brewing this beer (I subbed the rice to corn as per their original recipe) next batch ill go to rice and swap out the pale malt to vienna as per their latest release

First batch I used Voyager Compass but im out
  • 40% Pilsner Malt (Voyager Atlas)
  • 40% Pale Malt (Voyager Veloria)
  • 20% Corn (Gladfield Malted Maize)
Magnum at first wort to 13IBU

60 Min Boil

Whatever Mexican or other lager yeast you want to use, I used Diamond lager last time, considering using W34/70 this time but still deciding

Ill be taking 16L of this off and adding it to 6L of boiled water to drop the SG down to 1.048 as aiming for a 4.8% beer

Will then add more hops and boil for another 30mins

Simcoe to 16.7IBU 30min

Simcoe to 9.8IBU 5min

Cascade and Mosaic at 1.21 g/L each for a 20min whirlpool at 80C (Hopstand) )I ended up doing a 0min addition and letting it sit for 20mins as I cubed

Will take 4x11L cubes and im aiming for a 1.060 SG

22L will be brewed as a Cold IPA with Mangrove Jacks California Lager Yeast (M54) 5.9% this will be fermented warmer (haven't decided on if I use pressure yet or not)

22l will be brewed as a West Coast IPA With BRY97 6.2%

Both will get a 5 day dry hop when finished of Mosaic, Simcoe and Cascade 1.36g per L of each hop per beer

Ill add something like Whirlfloc at 45mins as well

That should leave me with 6L and I normally can recover an extra half a cube so will put whatever is left in another 11L cube which ill cube hop with Mandarina Bavaria (25g) if I don't have enough wort I can top up with boiled water will probably just use US05 for this (I managed to get the extra cube)


Guys that were getting 19L kegs off me have cut back as well, and I am looking at going down to brewing enough beer for 9.5L kegs as my Keezer is currently only 6 taps and I like to drink a range of styles


Timers all set to start heatup at 530am so I can mash in at 7ish, hoping for an easy brewday if I follow my notes well
:)


Copied from somewhere else I posted but day went well, apart from some minor spills
when filling cubes as I am rusty

IMG-20250102-WA0000.thumb.jpeg.dcc5e69f164ac0a31ed37e4f42077ea6.jpeg
IMG-20250102-WA0002.thumb.jpeg.85314d300a8c56209338d3fcdd8f167c.jpeg
IMG-20250102-WA0010.thumb.jpeg.52eb5fb4ba89de65afaeda6e5fe2cc71.jpeg

Probably going to get another 1.5: port welded below the current port for the dip tube (its way too high even with the long diptube I have) and then repurpose that port as a temperature port. Also considering another lower 2" element port so I can reduce my minimum batch volumes

Currently have 7.2kw of elements on this

I drain the last cube out the bottom of my kettle as my dip tube stops siphoning, so the screen helps with catching hop material, I am waiting on a filter from Cheeky Peak to also help with this. I have a boozuka screen in some 1.5" fittings and a sight glass as a temp filter (mainly to catch any grain that gets past my false bottom)

I tried it with the bottom drain (had it backwards to what I should have) and had some minor blockages

IMG-20250102-WA0026.thumb.jpeg.5674f44a40256d4b2f2df84931cee3a9.jpeg
 
I will give your recipe a shot after I do a double batch Aussie Lager this week. I have all ingredients less the Simcoe.
I like the idea of 11 litre cubes, will keep my eye out for some of these.
I have recently tried Nova lager as a change to W34/70, not that great for me, too clean a yeast. Maybe be better in a hopped beer all mine have been old school and noble hops.
The last few brews I have used Berlin (S23) and German (W34/70) yeasts by Cellar Science, and both have worked out well. I started a Czech pilsner yesterday and used S189 yeast as this works for me, 5 PSI from day 3.
 
Brewing today: a WC-style IPA and a Munich helles.
The IPA has a mix of cascade, kohatu and enigma late additions and dry hops, with magnum for most of the bittering. BB pale (last of the sack) and JW traditional ale malt, with a touch of dark crystal for colour. Fermenting with US05
The helles is all Weyermann Pilsner malt, with magnum bittering and Hallertau mittelfrüh. Will ferment with Bluestone Pilsner.
I usually cube my brews but decided to use the immersion chiller coil on the IPA. More faffing about than I like but it’s in the fermenter now and the garden got a good watering. The helles will be cubed.
 
I will give your recipe a shot after I do a double batch Aussie Lager this week. I have all ingredients less the Simcoe.
I like the idea of 11 litre cubes, will keep my eye out for some of these.
I have recently tried Nova lager as a change to W34/70, not that great for me, too clean a yeast. Maybe be better in a hopped beer all mine have been old school and noble hops.
The last few brews I have used Berlin (S23) and German (W34/70) yeasts by Cellar Science, and both have worked out well. I started a Czech pilsner yesterday and used S189 yeast as this works for me, 5 PSI from day 3.
They are ex Golden syrup, they are also used for molasses etc

Pretty sure places like plasdene do them new.

@DJ_L3ThAL hooked me up with my current supply. ♡

Simoce is pretty easy to sub out, I use it alot as I had 5kg of it at one point :p

I've got an amber lager I need to keg that's on WLP802, I've used it for 2 budvar clones before this.

My recipe does have some compromises as its 3 styles off one mash. But given WCIPA and Cold IPA (technically a hoppy IPL) are very similar these days im hoping ill get away with it

Will see what the lager vs Ale yeast does hoping the Ale yeast will add some esters and the lager will let the malt and hops shine
 
3 styles off one mash is a great way to use your time. 11 litre cube is the pitch rate recommended by most dry yeast manufactures.
You could halve the amount of yeast needed in a 22 litre batch by pitching the yeast on a 11 litre batch and the next day add another 11 cube.
Just don't leave it to long as there is a cutoff point when yeast no longer require oxygen. Maybe I will give this a go, I just need to eat a lot of pancakes to get thru a cube or two of golden syrup :p
 
3 styles off one mash is a great way to use your time. 11 litre cube is the pitch rate recommended by most dry yeast manufactures.
You could halve the amount of yeast needed in a 22 litre batch by pitching the yeast on a 11 litre batch and the next day add another 11 cube.
Just don't leave it to long as there is a cutoff point when yeast no longer require oxygen. Maybe I will give this a go, I just need to eat a lot of pancakes to get thru a cube or two of golden syrup :p
Yes I Drauflassen :p I normally double the volume within 24hrs, all my fermenters are now empty.

30L uni is soaking with PBW, will boil it tomorrow and then rinse off before I no rinse sanitize

Probably going to put the WCIPA and see if I can have it ready to enter in the Merri mashers comp
 

Latest posts

Back
Top