• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

[VIC] FS : 50 Litre Pot, secondary manifold + other bits

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

andytork

Well-Known Member
Joined
26/4/08
Messages
443
Reaction score
36
All,

Next part of clean out


50 Litre pot (approx)

25cm high, 50cm diameter, aluminium pot with lid and 3 piece ball valve. Served me well for lots of single batch AG in the early days, filled to the handle rivets on a one hour rolling boil reduces to almost exactly a cube

IMAG1235.jpg

$40 Pickup only



Stainless Thermowells (weldless)

100mm long (approx 13mm hole). Have a few left

IMAG0176__Medium_.jpg

$20 pickup, $25 posted



Fermenting Fridge (Faulty)

Pictured with a 60 litre fermenter , solid aluminium shelf, temp controller, ceramic heat lamp

FRIDGE IS FAULTY, TRIPS BREAKER (its not the temp controller). Would still make a good "keep it warm" for the cool months. Was working well until I left it sat for 6 months and turned in on.

post-7306-0-78381700-1390640880.jpg

$35 pickup only


Three way secondary regulator

New as pictured, 3 separate controls with check valves . These cost ~$300 new

regulator.jpg
$150 pickup, $165 posted

19L (?) A-Type keg

approx 19litre with A-type fitting, 56cm high (including handle rubber), 23 diameter

IMAG1237.jpg IMAG1238.jpg


$25 pickup only


Heat / Cool temp controllers

New, unused, have two left

C1206-D.jpg

$15 each pickup, $20 each posted





Will be listing my 3v electric setup, grain mill and 600+ litre chest freeze in the next week or so

All Items pickup Boronia, Please PM with any details as I will be added more to the thread shortly. Lots more stuff coming, not listing yet as it gets too confusing!
 
All of the above open to reasonable offers, having 2nd stage of clean out and need to get ready for the mamoth garage tidy

Also have a couple of long shank flow restrictor taps, one has a missing adjuster lever (but can still be done adjusted), new still in the bag, paid about about $50 each for them, will take $50 for the pair

Also have some 50 litre kegs knocking around

Andy
 
Just found

Brand new unused, Threaded ball lock QD's

4 x Liquid (black)
qd-beer-mfl.jpg
6 x gas (grey)
qd-gas-mfl.jpg

$45 for the lot, so $4.50 each
 
Just found

4 x 1/2" motorised stainless ball valves (5 wire)

Paid about $40 each for them, asking $20 each


5wirevalve.jpg
 
Found a few more 19l kegs

2 x normal corny style with ball locks, good condition, not used in a while. may need a clean, check
2 x mytton rod kegs (full stainless steel) , good condition , ball lock

1 x corny with snaplok style fittings (don't have any spare ball locks left)
1 x pretty banged up mytton rod with snaplok style fittings

$250 for the lot
 
Kegs, Reg, Taps & QD's sold pending payment / pickup

I may have a few more used QD's around and will be listing more bits later
 
For anyone wanting to use 32 amps in their brewery

IP66 Single phase socket
Matched plug with about 2m cable
Breaker.

11700866_10153471498382265_3052099854200522257_n.jpg

$60 for the lot
 
5 x fermenters
IMAG1319.jpg
1 x 60l (used twice)
4 x normal size (one hidden at back is a bunnings job, not as nice as others but still good), one has heating element in it (coopers style), other two are keg king

All have been stored with cleaning solution but will need a good clean, not used in 12 months

Selling as a job lot, looking for $50
 
andytork said:
5 x fermenters
attachicon.gif
IMAG1319.jpg
1 x 60l (used twice)
4 x normal size (one hidden at back is a bunnings job, not as nice as others but still good), one has heating element in it (coopers style), other two are keg king

All have been stored with cleaning solution but will need a good clean, not used in 12 months

Selling as a job lot, looking for $50
Pm sent.
 
IP66 stuff has sold.

Whats left (at the moment)

  • POT - $30
  • Old fridge - $30 if gone at weekend otherwise I am stripping for parts and hard wasting
  • Electric ball valves $20 each
  • Couple of thermowells $20 each
  • A few slightly used ball lock quick disconnects (about 5 of each) $ 4 each
  • A-type keg $15
  • Metal pluto gun with QD & line - $30
  • 2 x bench cappers $15 each
 
Back
Top