Unknown grain ratios

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mickomoose

Member
Joined
2/11/22
Messages
10
Reaction score
0
Location
Alice Springs
I about 12 bags of pre-mixed bags of grain based on recipes. They're labeled 'Black IPA', 'American pale', 'German lager' etc. The only problem is that I've got the bags are labelled with the beer style but htere's no information on what grains are in the bag or the ratio of grains. The advice I'm looking for is how I should go about brewing these. I'm hoping the brains trust me if there's anything I should consider when brewing these recipe bags. I'm presuming they've been prepared for a 19L or so final product and I was just going to work back from there. Also, add the appropriate hops for the style and volume of water/weight of grain. Is there anything I'm missing??
 
The weight of that grain bag is key. Use something like a Brewfather app to work out all your numbers for your weight of grain to pot/liquid volume. That way you will avoid making it too weak or too strong. Brewfather also has preloaded styles like Black IPA, American Pale etc with their beer style critical numbers, so then you can also nail the appropriate hop ratios too.
 
The grains are unmilled or, if milled, vacuum packed?
 
Where did the premixed bags come from?

They are mine. Err... were mine. They were bought from a previous brewer, and I brewed a few recipes off the bags and here is what I did.

general recommendations:
Weigh the bag, make sure you are using approximately the right weight of grain for that 19L batch. This will control your OG. Have a bag of DME/LME on hand to make last minute adjustments in case you undershoot the target gravity. If there is more grain in the bag, pull some and put it in a zip top bag, and save it for another batch.

Water. Most grains absorb about the same volume of water, so generally speaking your mash/sparge/pre-boil volumes are about the same for a 19l batch with the same starting weight of grain.

Sort the hops you got into 3 piles, bittering, aroma, and dual use. If you PM me your email, I can send you an excel sheet with the inventory and I've already got them sorted, and weight tallies.

Look at existing recipes for an idea of the type, timing, and amount of hops to use. You probably already know your hop preferences in various styles, but you can and IMO should experiment. Styles matter somewhat, but if you are not submitting for a contest, or making commercial beer that you want your customer to know whats in the can, then take some licence to have fun. Make something you enjoy drinking, regardless of style.

Software like beersmith, will be helpful to calculate your IBU's, You may want to de-rate the alpha-acid on the hops by 10-20% given their age, or not depending on your love of the hop flavours.

The water here in Alice Springs is hard as F^$#&^. I generally used 50% RO and 50% filtered tap. Using the water calculators that got the mineral content into the 'reasonable' range. If you want a deal on a RO system... let me know =).

Have 2 beers you are wanting to brew. The day of, or perhaps before, open a corner of the grain bag, and taste a few of the grains. If they taste good, and are not stale/mushy/off then you're likely good to go, if the grain doesn't taste 'good' don't brew with it, you're probably going to make crap beer.

I'm amazed how many brewers don't taste their ingredients. It really does help give you an idea what flavours each grain of the recipe contributes.

I've got a copy of beersmith, so if you want to sit down one night over here, and craft a few recipes let me know.
 
They are mine. Err... were mine. They were bought from a previous brewer, and I brewed a few recipes off the bags and here is what I did.

general recommendations:
Weigh the bag, make sure you are using approximately the right weight of grain for that 19L batch. This will control your OG. Have a bag of DME/LME on hand to make last minute adjustments in case you undershoot the target gravity. If there is more grain in the bag, pull some and put it in a zip top bag, and save it for another batch.

Water. Most grains absorb about the same volume of water, so generally speaking your mash/sparge/pre-boil volumes are about the same for a 19l batch with the same starting weight of grain.

Sort the hops you got into 3 piles, bittering, aroma, and dual use. If you PM me your email, I can send you an excel sheet with the inventory and I've already got them sorted, and weight tallies.

Look at existing recipes for an idea of the type, timing, and amount of hops to use. You probably already know your hop preferences in various styles, but you can and IMO should experiment. Styles matter somewhat, but if you are not submitting for a contest, or making commercial beer that you want your customer to know whats in the can, then take some licence to have fun. Make something you enjoy drinking, regardless of style.

Software like beersmith, will be helpful to calculate your IBU's, You may want to de-rate the alpha-acid on the hops by 10-20% given their age, or not depending on your love of the hop flavours.

The water here in Alice Springs is hard as F^$#&^. I generally used 50% RO and 50% filtered tap. Using the water calculators that got the mineral content into the 'reasonable' range. If you want a deal on a RO system... let me know =).

Have 2 beers you are wanting to brew. The day of, or perhaps before, open a corner of the grain bag, and taste a few of the grains. If they taste good, and are not stale/mushy/off then you're likely good to go, if the grain doesn't taste 'good' don't brew with it, you're probably going to make crap beer.

I'm amazed how many brewers don't taste their ingredients. It really does help give you an idea what flavours each grain of the recipe contributes.

I've got a copy of beersmith, so if you want to sit down one night over here, and craft a few recipes let me know.
Sounds like a good plan, but I am a bit confused since you're not the OP.
 
Sorry for the slow response, I got distracted by non-beer related things. Thanks all for the replies, really appreciate the feedback. And g’day Drakken, ha ha small world! thanks for the low down on how you’ve approached the mystery grain bags. I laid down a first brew on the weekend - an American pale which is bubbling away nicely. Ill
Let you know how it turns out.

I pretty much did what you’ve suggested. Weighed the bag and plugged it into Brewfather as 100% pale malt a put in the style and added hops appropriate to the style. I didn’t get the OG until it was in the fermenter so no opportunity to adjust on the fly - something to remember for next time. The numbers looked alright though.

Good suggestion to sample the grains before chucking in the pot. Also something for next time :).
 
Back
Top