The Brauduino (Matho’s Controller) Buy thread
- Thread starter kirem
- Start date
Help Support Australia & New Zealand Homebrewing Forum:
A BIG THANK YOU to everyone who has ordered and paid for their kit and spare probes!
If you are not on the list and would like a kit, PM me.
If you need to pull out of the buy, please PM me and let me and I will open up the spot for others.
News:
- Temp probes have been received! Will post pics after this. - please pay now if you want extra probes!
- PCBs - received and looking good!
- Heatsinks are in production - almost done.
- Boxes are the last part of the kit - ordered! (took an enormous amount of time and effort to find a supplier that was within tolerances - thanks for your patience)
- You might notice the list has grown. Lots of people have asked for kits and it isn't that hard to order more parts, so if you want one - get in touch quickly so I can add you into the buy.
Parts Received so far: buttons, stainless screws, nuts, nylon standoffs, buzzers, thermal paste, SSRs, Arduino Megas, Custom cables, Custom LEDs, Power connectors.
The list below indicates what I have received. Please don't edit this list as it contains payment information. If you have paid and it is not indicated on the list, wait a few days. I will try to update it regularly. Thanks Everyone!
1. Fatamorgana - paid + 1 extra probe paid
2. natdene - paid
3. Belter - paid
4. gap - paid
5. hubert hophead - paid - 1xspare probe paid
6. barneey - paid
7. ArnieW - paid
8. The Judge - paid - spare probe paid
9. bowhunterslodge x1 - paid
10. tateg - paid - 1 spare probe paid
11. LiquidCurrency - paid - 1 spare probe paid
12. rafinus - paid
13. crazyhorse - paid 2 spare probes paid
14. marksy (x 2) - paid
15. JB - paid - 2 spare probes paid
16. Oggie - paid
17. Masters Brewery - paid
18. Cervantes -paid 1 spare probe paid
19.brewart - paid
20. sipahono -paid
21. BobCharlie - paid
22. jubilakka - paid
23. CoxR - paid
24. Capnk - paid
25. breakbeer - paid
26. Oneeye - paid
27. screamadelica - paid
29. Screamadelica - paid
30. Neo04 - paid
31. claypot - paid
32. Jase - paid
33. Marc2800 -2nd - paid
34. lynchman x 2 - paid
35. Bigbern - paid - 1 sare probe paid
36. the boy from tas - paid
37. stux - paid
38. Shaunous - paid - 2 x spare probes paid
39. jonasbegood - paid
40. vooharmy - paid
41. Tassiehopper - paid 1 spare probe paid
42.buggybouy - paid 1 spare probe paid
43. Misterwilson - paid
44.matteus - paid
45. parktho - paid
46. MrDave - paid
47. jabbos - paid
48. 9finger - paid
49. tommy160 - paid
50. bigmacthepunker - paid - 2 spare probes paid
51. nainsook - paid
52. BazzaB - paid
53. zwitter - paid
54. glen - paid
55. kiwisika - paid
56. sluggerdog - paid, 1x spare probe paid
57. smokomark - paid
58. SBOB - paid - 1spare probe paid
59. Marc280 - paid
60. Dug - paid
61. Siege - paid
62. Malty Cultural - paid
63.ferg - paid 1x spare probe paid
64. camelbak28 - paid
65. 620rossco - paid
66. Nick R - paid
67. bowhunterslodge x2 - paid
68. Seemore - paid
69. Eucyblues - paid
70. Wort - paid 2x probes paid
71.Mar5T - paid
72. Rambo - paid
73. lynchman x3 - paid
74. LarsjohanS - paid
75. fortmonty - paid
76. zappa - paid - 2x spare probes paid
77. Pugwash - paid
78. noodslane - paid
79. Syd - paid
80. Mardoo - paid -2 spare probes paid
81. BlueMutt - paid
82. Wapehawi - paid - 1 spare probe paid
83. AndrewF - paid - 1 spare probe paid
84. northernbrewer - paid - 2 spare probes paid
85. ramugupta - paid
86.niftinev - paid
87. bungelbear - paid
88. Drunk Az - paid - spare probe paid
89. freelander2002 (x2) - paid
91. Guysmiley54 - paid
92. Crozdog - paid
93. conjob - paid
94. Chris_O - paid
95. Brendrage - paid
96. Guidos - paid
97. madhomebrewer - paid
98. CoW77 - paid
99. MarketLane - paid
100. mojonojo (parts) - paid
101. Steward - paid , 2 spare probes paid
102. Reckless - paid
103. redlegger - paid
104. Dr Rummy - paid
105. bruiserbbq - paid
106. minikeg - paid
107. CCRacer - paid
108. Kolodij - paid
109. Grunta - paid
110. ken_gilchrist - paid
111. eviltabouleh - paid
112.Tzoon - paid
113.lespaul - paid
Details about this kit if you want to know more:
Hi Everyone,
The costing came out to $245AUD per kit + $15 postage (AusPost express) once all the parts and exchange rates are accounted for.
If you are outside Aus, the kit is around 1.6kg, which means that the calculation needs to be for 1.5-2kg to allow for packaging (appx 150/200gr I think). If you are international, the price is $260+Intl postage+$5 for packaging materials the extra $15 is to cover the Paypal fees). Go to: http://auspost.com.a...calculator.html and select Overseas (parcels) and check out weights. Generally better value can be had by combining weight - eg: 2 kits =3-3.5kg and usually makes shipping cost per kit half.
I've put together a quick (actually, it is 30mins...) video showing what is included and how it all goes together so if you are trying to figure out what is included and how difficult / easy it is, give it a watch. It is so beautifully simple to put together.
Take a look: https://www.youtube.com/watch?v=EdKQ31dLl28
If you are ready to pay - the information you need is here:
https://docs.google....?usp=send_form�
Based on the first survey I did, I'm looking at getting heating elements and stainless plates to make the build process easier. So there is a quick survey about that. The only question you have to complete is the one saying - Yes I will be responsible for the kit I build, not Lael (basically - you build it, you are responsible for it). Once you submit that, you'll get account details to put the money into, and I can start ordering parts! (I'll actually wait a little until we get enough people paid for this to go ahead). I'll add payment status to the above list once it starts coming in.
A BIG Thank You! to Austin and the Admin crew for giving me supporter status to allow me to handle all the messages coming through. Super appreciated!
If you are not on the list and would like a kit, PM me.
If you need to pull out of the buy, please PM me and let me and I will open up the spot for others.
News:
- Temp probes have been received! Will post pics after this. - please pay now if you want extra probes!
- PCBs - received and looking good!
- Heatsinks are in production - almost done.
- Boxes are the last part of the kit - ordered!
(took an enormous amount of time and effort to find a supplier that was within tolerances - thanks for your patience)- You might notice the list has grown. Lots of people have asked for kits and it isn't that hard to order more parts, so if you want one - get in touch quickly so I can add you into the buy.
Parts Received so far: buttons, stainless screws, nuts, nylon standoffs, buzzers, thermal paste, SSRs, Arduino Megas, Custom cables, Custom LEDs, Power connectors.
The list below indicates what I have received. Please don't edit this list as it contains payment information. If you have paid and it is not indicated on the list, wait a few days. I will try to update it regularly. Thanks Everyone!
1. Fatamorgana - paid + 1 extra probe paid
2. natdene - paid
3. Belter - paid
4. gap - paid
5. hubert hophead - paid - 1xspare probe paid
6. barneey - paid
7. ArnieW - paid
8. The Judge - paid - spare probe paid
9. bowhunterslodge x1 - paid
10. tateg - paid - 1 spare probe paid
11. LiquidCurrency - paid - 1 spare probe paid
12. rafinus - paid
13. crazyhorse - paid 2 spare probes paid
14. marksy (x 2) - paid
15. JB - paid - 2 spare probes paid
16. Oggie - paid
17. Masters Brewery - paid
18. Cervantes -paid 1 spare probe paid
19.brewart - paid
20. sipahono -paid
21. BobCharlie - paid
22. jubilakka - paid
23. CoxR - paid
24. Capnk - paid
25. breakbeer - paid
26. Oneeye - paid
27. screamadelica - paid
29. Screamadelica - paid
30. Neo04 - paid
31. claypot - paid
32. Jase - paid
33. Marc2800 -2nd - paid
34. lynchman x 2 - paid
35. Bigbern - paid - 1 sare probe paid
36. the boy from tas - paid
37. stux - paid
38. Shaunous - paid - 2 x spare probes paid
39. jonasbegood - paid
40. vooharmy - paid
41. Tassiehopper - paid 1 spare probe paid
42.buggybouy - paid 1 spare probe paid
43. Misterwilson - paid
44.matteus - paid
45. parktho - paid
46. MrDave - paid
47. jabbos - paid
48. 9finger - paid
49. tommy160 - paid
50. bigmacthepunker - paid - 2 spare probes paid
51. nainsook - paid
52. BazzaB - paid
53. zwitter - paid
54. glen - paid
55. kiwisika - paid
56. sluggerdog - paid, 1x spare probe paid
57. smokomark - paid
58. SBOB - paid - 1spare probe paid
59. Marc280 - paid
60. Dug - paid
61. Siege - paid
62. Malty Cultural - paid
63.ferg - paid 1x spare probe paid
64. camelbak28 - paid
65. 620rossco - paid
66. Nick R - paid
67. bowhunterslodge x2 - paid
68. Seemore - paid
69. Eucyblues - paid
70. Wort - paid 2x probes paid
71.Mar5T - paid
72. Rambo - paid
73. lynchman x3 - paid
74. LarsjohanS - paid
75. fortmonty - paid
76. zappa - paid - 2x spare probes paid
77. Pugwash - paid
78. noodslane - paid
79. Syd - paid
80. Mardoo - paid -2 spare probes paid
81. BlueMutt - paid
82. Wapehawi - paid - 1 spare probe paid
83. AndrewF - paid - 1 spare probe paid
84. northernbrewer - paid - 2 spare probes paid
85. ramugupta - paid
86.niftinev - paid
87. bungelbear - paid
88. Drunk Az - paid - spare probe paid
89. freelander2002 (x2) - paid
91. Guysmiley54 - paid
92. Crozdog - paid
93. conjob - paid
94. Chris_O - paid
95. Brendrage - paid
96. Guidos - paid
97. madhomebrewer - paid
98. CoW77 - paid
99. MarketLane - paid
100. mojonojo (parts) - paid
101. Steward - paid , 2 spare probes paid
102. Reckless - paid
103. redlegger - paid
104. Dr Rummy - paid
105. bruiserbbq - paid
106. minikeg - paid
107. CCRacer - paid
108. Kolodij - paid
109. Grunta - paid
110. ken_gilchrist - paid
111. eviltabouleh - paid
112.Tzoon - paid
113.lespaul - paid
Details about this kit if you want to know more:
Hi Everyone,
The costing came out to $245AUD per kit + $15 postage (AusPost express) once all the parts and exchange rates are accounted for.
If you are outside Aus, the kit is around 1.6kg, which means that the calculation needs to be for 1.5-2kg to allow for packaging (appx 150/200gr I think). If you are international, the price is $260+Intl postage+$5 for packaging materials the extra $15 is to cover the Paypal fees). Go to: http://auspost.com.a...calculator.html and select Overseas (parcels) and check out weights. Generally better value can be had by combining weight - eg: 2 kits =3-3.5kg and usually makes shipping cost per kit half.
I've put together a quick (actually, it is 30mins...) video showing what is included and how it all goes together so if you are trying to figure out what is included and how difficult / easy it is, give it a watch. It is so beautifully simple to put together.
Take a look: https://www.youtube.com/watch?v=EdKQ31dLl28
If you are ready to pay - the information you need is here:
https://docs.google....?usp=send_form�
Based on the first survey I did, I'm looking at getting heating elements and stainless plates to make the build process easier. So there is a quick survey about that. The only question you have to complete is the one saying - Yes I will be responsible for the kit I build, not Lael (basically - you build it, you are responsible for it). Once you submit that, you'll get account details to put the money into, and I can start ordering parts! (I'll actually wait a little until we get enough people paid for this to go ahead). I'll add payment status to the above list once it starts coming in.
A BIG Thank You! to Austin and the Admin crew for giving me supporter status to allow me to handle all the messages coming through. Super appreciated!
stux
Hacienda Brewhaus
- Joined
- 15/12/09
- Messages
- 2,978
- Reaction score
- 310
Worth pointing out that 20A at 110V is only 2200W.lael said:
My understanding is its more usual for American 3V brewers to run off a laundry/dryer plug, which is 240V at I think 30A.
Again, really need to check the voltage and wattage of the Boilcoil to determine if its under the 20A limit.
2 15A or 20A coils at 110 or 220V would be within the units capacity.
dean_wales
Member
Trust me, their device is Spark based and all temperature sensors are DS18B20s!Stux said:Very cool solution there, but doesn't specifically say its the DS18B20 (I think I got that right
freelander2002
Well-Known Member
- Joined
- 3/11/14
- Messages
- 45
- Reaction score
- 33
And trust me as i alredy use it on a loaner Matheo controller ..... Nice piece of kit
Easily possible. I have two systems and swap the controllers I have in and out each time. Same deal if you want to swap power I can provide more connectors for you (pm me). Or you can run the power out to standard power sockets.
Mardoo
Noob What Craps On A Bit
Derp
thewindedkilt
New Member
- Joined
- 17/8/15
- Messages
- 4
- Reaction score
- 0
I just was directed to this link about the brauduino-matho’s-controller. I am in desperate need of one and pray that purchases can still be made at this date.
MastersBrewery
Journeyman, the learning never stops
- Joined
- 7/6/11
- Messages
- 2,319
- Reaction score
- 683
PM Laelthewindedkilt said:
thewindedkilt
New Member
- Joined
- 17/8/15
- Messages
- 4
- Reaction score
- 0
O.K. I am really lame... and do not see the controller for sale in the store section of the site. So where can I go to not only become a $upportive fan but also an owner of a brauduino-matho’s-controller?
Go here: http://aussiehomebrewer.com/user/26092-lael/thewindedkilt said:
Then click on the button 'Send me a message"
Then type (or cut and paste):
Hi lael, I'd really like to buy one of your fantastic kits, are there any still available?
I await your answer with baited breath :unsure:
Cheers :icon_cheers:
PS. I'll do anything to get one :wub:
Similar threads
