Hi guys,
I recently bought a stc-1000 off ebay, wired it all up and the had a sparky check it over to make sure I wasn't going to fry myself. On Monday I plugged it in and it was working perfectly until yesterday when I moved the unit to a different location. When I plug it in now it no longer seems to switch the fridge on when above my set temp, even though the cooling light is flashing on the display and the probe is working accurately. I opened it up and rechecked all the wires, none were loose, and plugged the fridge in without the controller and that works fine too. Any ideas what could be the problem? Don't go too deep on the terminology, as I have very little idea about electronics.
Cheers
I recently bought a stc-1000 off ebay, wired it all up and the had a sparky check it over to make sure I wasn't going to fry myself. On Monday I plugged it in and it was working perfectly until yesterday when I moved the unit to a different location. When I plug it in now it no longer seems to switch the fridge on when above my set temp, even though the cooling light is flashing on the display and the probe is working accurately. I opened it up and rechecked all the wires, none were loose, and plugged the fridge in without the controller and that works fine too. Any ideas what could be the problem? Don't go too deep on the terminology, as I have very little idea about electronics.
Cheers