Portable Bar Build

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

fraser_john

Go Pies
Joined
17/1/06
Messages
2,477
Reaction score
374
Location
Victoria
Geelong Craft Brewers had decided to build a bit of a portable bar, our annual break up camp was always a bit of a mess with people bringing all sorts of ice, bins etc. The club wanted to give something back to the members, so it was decided.

We picked up some coolroom panels off ebay for $70 and we started the build.

It will fit 8 kegs with 8 taps, a movable divider will split the interior up to fit 2,4,6 or all 8 kegs. 100mm coolroom panel means the ice should last for a long time.

It will be on a removable dolly frame built for purpose to make it easy to move around etc.

Front and back panels are skinned on one side only and we will apply either some corrugated iron or something more decorative.

Yet to build the font riser, will be two section of panel joined with a groove/home run for shank nut & line.

Fun project.

Pics so far......

IMG_20160108_1708341.jpg


IMG_20160108_1710511.jpg


IMG_20160108_1939231.jpg


IMG_20160109_0915421.jpg


IMG_20160109_1722551.jpg


IMG_20160109_1722591.jpg


IMG_20160109_1723041.jpg
 
Been a while and time to update. Keg King were terrific about giving the club a discount, so it is fully fitted with 8 stainless Intertap, non flow control models.

IMG_20160213_160453.jpg

Then, the font block can be filled with ice to keep the lines and taps cold, each line runs through a 90mm piece of storm water PVC pipe and can be stuffed with ice. Melted water simply runs down back into the main chamber. Chilly!

IMG_20160213_160458.jpg
 
Two gas manifolds handle the 8 gas lines we need.

IMG_20160213_160511.jpg
IMG_20160213_160518.jpg

8 beer lines with 4mm Bevlex line, super flexible even when sub zero.

IMG_20160213_160523.jpg
 
Got tiny hands? We could have used you installing the nuts on each shank! Fortunately @HoppinMad has smaller hands than my ham fists!

IMG_20160213_171350.jpg
 
Yeah but now you need to rename the thread '8 tap Portable Iced chilled coffin keezer' cause it'll just make it easier for us copy cats to find later. I mean anyone can build a single TA system.

Epic
 
Cross referencing another post, the drip tray as fabricated by one of our members, FlyinHi and his BIL, see post
 
Looks awesome mate! Such a good build..

Where's the STC?
 

Latest posts

Back
Top