m3taL
Well-Known Member
Been AG brewing for about 12 Months and have decided to Call it quits...... Health reasons etc need to get off the booze so i now have no need for my brewing gear. It has been a hard decision to give up the Beer as brewing has been a much loved hobby and will live a large void in my life, I have brewed every fortnight and then some for 12 months, which i know to some brewers who have brewed for years seems like nothing but to me it has been an amazing hobby and i am thrilled i got to do it, Its just a pity that i do have to stop.
Would like to try move the whole setup as one....
Inc
-50 L Keggle HLT, With SS/Glass Sight Glass, SS Temp Probe (For STC), 2400w Element
-50L Keggle Boil Pot, Pickup Tube, Brass Tap, 2 x 2400w Elements No worries Boiling 36L Preboil.
-25L Esky Mashtun, 4" Dial Thermometer, Custom made Copper manifold, Tap.
- 3mt Counterflow Chiller, 1/2 Copper with 25mm Clear tube outer pipe.
- Few meters of 13mm Silicone hose various lengths to connect boil pot to chiller, chiller to Fermenter, HLT Run tube, long length to fill kegs etc....
-Keg King Refractometer (Brand new used it for 2 brews)
-35 L Fermenter, Tap, Airlock (Grain and Grape one)
- Large fermenting fridge LG Fan Forced about 300L Fridge/Freezer that has been modified to send most of the cold down to the fridge Really good for Cold Crashing)
- STC Controller Heat/Cool Used for HLT and Fermenting Fridge, With Std Probe for Fermenting Fridge.
-25A RCBO Saftey switch circuit breaker (NHP) and 2 x Din Mount Sockets (Hager) (Will need to be installed by an electrician, Only cost me about $120 to get it installed into my meter box)
The Elements are Modified Kettle elements and use a 40mm Hole, the two in the boil pot were replaced 2 brews ago, previous to that the last 2 elements Exceeded 40 Boils as a mate and i were brewing 2/3 brews a fortnight they hold up very well, As for HLT it will be brand new as i will replace it before sale to as its done around 40 brews also but is still fine so a Spare element will come with the setup.
Happy to show all the gear to anyone who is interested, Its been a great brewing system and will definatly be a great brewing system for many years to come. Buyer will not be Disappointed.
Need to get the lot sorted out and Layed out nicely to take Photos and will add them tomorrow
May be more Stuff, depending on what i find laying around all the extras etc.
Looking for $600, Well over that was spent on it i can assure you. the RCBO and Din mount Plugs are $125 worth alone.
Would like to try move the whole setup as one....
Inc
-50 L Keggle HLT, With SS/Glass Sight Glass, SS Temp Probe (For STC), 2400w Element
-50L Keggle Boil Pot, Pickup Tube, Brass Tap, 2 x 2400w Elements No worries Boiling 36L Preboil.
-25L Esky Mashtun, 4" Dial Thermometer, Custom made Copper manifold, Tap.
- 3mt Counterflow Chiller, 1/2 Copper with 25mm Clear tube outer pipe.
- Few meters of 13mm Silicone hose various lengths to connect boil pot to chiller, chiller to Fermenter, HLT Run tube, long length to fill kegs etc....
-Keg King Refractometer (Brand new used it for 2 brews)
-35 L Fermenter, Tap, Airlock (Grain and Grape one)
- Large fermenting fridge LG Fan Forced about 300L Fridge/Freezer that has been modified to send most of the cold down to the fridge Really good for Cold Crashing)
- STC Controller Heat/Cool Used for HLT and Fermenting Fridge, With Std Probe for Fermenting Fridge.
-25A RCBO Saftey switch circuit breaker (NHP) and 2 x Din Mount Sockets (Hager) (Will need to be installed by an electrician, Only cost me about $120 to get it installed into my meter box)
The Elements are Modified Kettle elements and use a 40mm Hole, the two in the boil pot were replaced 2 brews ago, previous to that the last 2 elements Exceeded 40 Boils as a mate and i were brewing 2/3 brews a fortnight they hold up very well, As for HLT it will be brand new as i will replace it before sale to as its done around 40 brews also but is still fine so a Spare element will come with the setup.
Happy to show all the gear to anyone who is interested, Its been a great brewing system and will definatly be a great brewing system for many years to come. Buyer will not be Disappointed.
Need to get the lot sorted out and Layed out nicely to take Photos and will add them tomorrow
May be more Stuff, depending on what i find laying around all the extras etc.
Looking for $600, Well over that was spent on it i can assure you. the RCBO and Din mount Plugs are $125 worth alone.