Mzungu
Active Member
- Joined
- 24/3/12
- Messages
- 25
- Reaction score
- 0
Hi guys and gals, after 6 months of not brewing I have decided to sell off all my home brew gear. Everything will need a clean because its been sitting under the house gathering dust and cobwebs.
1 KegMaster v3 2 Tap - keypad panel doesn't work (35$from KegKing) but still runs (have a spare PCB board, got the wrong item to fix it).
1 MashMaster MiniMill - not fluted rollers.
2 Kegs - one used, one fairly new, only used once. Disconnects and tubing are still connected in the fridge.
1 2.6kg gas bottle plus regulator - has bracket to go onto back of fridge, still gas in it.
1 Unfinished SS Herms tube project with TriClover fittings - You will have to coil your own copper tubing to fit (I tried and failed) and I would recommend fitting some sort of pressure relief valve. Uses KegKing heating elements.
1 Spare Keg King Weldless Element
1 75L pot with lid and welded TriClover fitting.
1 MegaJet Burner
1 MKII Magnetic drive pump with fittings
1 KegKing weldless temp with weldless thermowell
1 false bottom
1 Spare Keg King Weldless Element
Various other bits and pieces - TriClover Fittings, refractometer, little brown pump, stc1000, old hops/yeast/grain, bottle capper, heat belt, silicone/beer tubing, cleaning powders etc...
750 ONO for the lot, Logan area, south Brisbane.
1 KegMaster v3 2 Tap - keypad panel doesn't work (35$from KegKing) but still runs (have a spare PCB board, got the wrong item to fix it).
1 MashMaster MiniMill - not fluted rollers.
2 Kegs - one used, one fairly new, only used once. Disconnects and tubing are still connected in the fridge.
1 2.6kg gas bottle plus regulator - has bracket to go onto back of fridge, still gas in it.
1 Unfinished SS Herms tube project with TriClover fittings - You will have to coil your own copper tubing to fit (I tried and failed) and I would recommend fitting some sort of pressure relief valve. Uses KegKing heating elements.
1 Spare Keg King Weldless Element
1 75L pot with lid and welded TriClover fitting.
1 MegaJet Burner
1 MKII Magnetic drive pump with fittings
1 KegKing weldless temp with weldless thermowell
1 false bottom
1 Spare Keg King Weldless Element
Various other bits and pieces - TriClover Fittings, refractometer, little brown pump, stc1000, old hops/yeast/grain, bottle capper, heat belt, silicone/beer tubing, cleaning powders etc...
750 ONO for the lot, Logan area, south Brisbane.