Hey guys, a while ago i got my hands on some ultrathick cold room panels and started with a keg fridge build. I have way too many commitments at the moment so I cannot undertake this project and would rather see another brewer make something of it.
Included is 6 panel sections, which have been cut appropriately to make a fridge space that will hold 6 cornie kegs with headspace, plus plenty of room for a fridge condensor line to fit in there.
All that's needed is to glue/seal it up, attach a handle for the lid (you get a free one with this gear), and then get a fridgie to gut/gas up a fridge line through it for you.
Anyway, its all going out the door for nothing, pickup only from Capalaba, Brisbane. (you'll need a ute or trailer)
If these dont end up at a good home in say, a month, i'll have to sadly take them to the tip.
Image below: "cutaway" of the fridge space - note other panels are out of shot. kegs not included (miiiineeee!)
Included is 6 panel sections, which have been cut appropriately to make a fridge space that will hold 6 cornie kegs with headspace, plus plenty of room for a fridge condensor line to fit in there.
All that's needed is to glue/seal it up, attach a handle for the lid (you get a free one with this gear), and then get a fridgie to gut/gas up a fridge line through it for you.
Anyway, its all going out the door for nothing, pickup only from Capalaba, Brisbane. (you'll need a ute or trailer)
If these dont end up at a good home in say, a month, i'll have to sadly take them to the tip.
Image below: "cutaway" of the fridge space - note other panels are out of shot. kegs not included (miiiineeee!)