Rob S
Well-Known Member
- Joined
- 4/1/12
- Messages
- 230
- Reaction score
- 5
Ok everything must go. $500 or best offer by the weekend (by PM only). I'm located in Muswellbrook so I can deliver around the Upper Hunter or East to Newcastle upon prior arrangement. PM me if you have questions or to arrange to come view. Lets go...
Crown 30L urn with 18ft of 1/2 inch copper as heat transfer. Hose barb on inlet and outlet. Outlet has stainless steel temp probe which plugs straight STC1000 controller so similar. Garden hose fitting on back of urn with tap for easy filling. Tap on front so you can use water to sparge. Power cord comes with deutsch plug. 60L aluminium wort boiling pot. Tap on front and copper pickup inside. March pump. I think it's the 815 PL model but not sure ask if you want serial number model number etc. 240V edition. Comes with hose barbs and tap on outlet.
Maxgas Allrounder. Puts out some serious heat when you wind up the Cigweld regulator. Cable and regulator made up by Gasweld bloke. Metal table with grate used to get some distance between the burner and the 60L aluminium pot.
Beer fridge with STC1000 on extension cord (fridge power cable intact) Fits two fermenters inside easily if you take out the top and bottom shelves.
Home made stirplate. Goes well with the round stir bar. I used a ceramic pudding bowl with a curved bottom covered with glad wrap for the yeast and it worked very well.
Three of the four temp controllers (the other is on top of fermentation fridge). Three of them are wired through extension cords. Three are STC1000's and the other I think is a Fridgemate brand???
Ok that's all the main stuff and here's what's left over that might be of interest.
Silicon tubing to tie it all together. Bottle capper and 1 and half packets of crown seals. Grolsch bottles (no rubber) - 18 if I counted right. Glass thermometer. 5L carboy. Water test kit for bore water. PH meter (with calibration powders). Bottlebrush. Heat belt. Glass hydrometer.
Ok that's about it. There's a few odds and ends like a AC to AC solid state relay, some switches, wiring diagrams etc.
Hope that someone is interested.
Cheers
Rob
Crown 30L urn with 18ft of 1/2 inch copper as heat transfer. Hose barb on inlet and outlet. Outlet has stainless steel temp probe which plugs straight STC1000 controller so similar. Garden hose fitting on back of urn with tap for easy filling. Tap on front so you can use water to sparge. Power cord comes with deutsch plug. 60L aluminium wort boiling pot. Tap on front and copper pickup inside. March pump. I think it's the 815 PL model but not sure ask if you want serial number model number etc. 240V edition. Comes with hose barbs and tap on outlet.
Maxgas Allrounder. Puts out some serious heat when you wind up the Cigweld regulator. Cable and regulator made up by Gasweld bloke. Metal table with grate used to get some distance between the burner and the 60L aluminium pot.
Beer fridge with STC1000 on extension cord (fridge power cable intact) Fits two fermenters inside easily if you take out the top and bottom shelves.
Home made stirplate. Goes well with the round stir bar. I used a ceramic pudding bowl with a curved bottom covered with glad wrap for the yeast and it worked very well.
Three of the four temp controllers (the other is on top of fermentation fridge). Three of them are wired through extension cords. Three are STC1000's and the other I think is a Fridgemate brand???
Ok that's all the main stuff and here's what's left over that might be of interest.
Silicon tubing to tie it all together. Bottle capper and 1 and half packets of crown seals. Grolsch bottles (no rubber) - 18 if I counted right. Glass thermometer. 5L carboy. Water test kit for bore water. PH meter (with calibration powders). Bottlebrush. Heat belt. Glass hydrometer.
Ok that's about it. There's a few odds and ends like a AC to AC solid state relay, some switches, wiring diagrams etc.
Hope that someone is interested.
Cheers
Rob
and yes lack of funds...I need to stop buying expressive imported beers!!
