Nevsmantis
Member
- Joined
- 1/10/15
- Messages
- 10
- Reaction score
- 0
In light of me upgrading to a bigger capacity setup for sale is part of my "brew in a bucket" setup.
The setup consists of:
For full transparancy, this system has gone through several iterations with me and I would say that for some mashes the stainless mesh in the bottom is too fine and the re circulation doesn't flow well. My next iteration would have been more bottom holes and using a brew bag or bigger mesh stainless mesh.
Again a nice start to a system with an electric pot with two 1/2" fittings already silver soldered into it. No idea value wise and I don't want to calculate my costs ;-)
Pictures will follow soon.
Located in Newport (VIC)
The setup consists of:
- 32 liter stainless pot with two 1/2" fittings silver soldered into it and a 2500w full stainless electric element (weldless). Comes with lid as well.
- Smaller stainless pot to be used instead of a "brew bag". Bottom has a hole pattern drilled and the 4 stainless steel bolts are used as legs and keep a stainless steel mesh in place. Comes with a lid with a 1/2" hole in it.
- Two stainless cross beams to put on top of the biggest pot when mashing is complete, this allow the inner pot to drain.
For full transparancy, this system has gone through several iterations with me and I would say that for some mashes the stainless mesh in the bottom is too fine and the re circulation doesn't flow well. My next iteration would have been more bottom holes and using a brew bag or bigger mesh stainless mesh.
Again a nice start to a system with an electric pot with two 1/2" fittings already silver soldered into it. No idea value wise and I don't want to calculate my costs ;-)
Pictures will follow soon.
Located in Newport (VIC)