Connectors for vinyl tubing

[stevonz]

I picked up some vinyl tubing to connect glycol chiller to coil in fermentor. The tubing is 10mm ID 14mm OD. I've currently got clamps at each end of the tube.

Looking at portability for movement and cleaning etc so looking at options for connectors to disconnect tubing from fermentor, ideally they would have check valve so no spillage. Any ideas? Can't seem to locate anything on KK or KL.

 

[djebel]

Fatlock (or similar) would to the job.

Assuming you're only running one cooling circuit, you would need:

2 of these:
https://www.kegking.com.au/kinglok-female-x-5-8-male-font-adaptor.html
2 of these:
https://www.kegking.com.au/kinglok-male-x-5-8-male-check-valve-liquid.html
4 of these:
https://www.kegking.com.au/10mm-straight-barbtail-stainless-steel-to-be-used-with-5-8-hex-nut.html
4 of these:
https://www.kegking.com.au/5-8-inch-hex-nut-for-keg-coupler-or-tap-shank.html
and a few sundry clamps to secure the hose over the barbs.

 

[stevonz]

Fatlock (or similar) would to the job.

Assuming you're only running one cooling circuit, you would need:

2 of these:
https://www.kegking.com.au/kinglok-female-x-5-8-male-font-adaptor.html
2 of these:
https://www.kegking.com.au/kinglok-male-x-5-8-male-check-valve-liquid.html
4 of these:
https://www.kegking.com.au/10mm-straight-barbtail-stainless-steel-to-be-used-with-5-8-hex-nut.html
4 of these:
https://www.kegking.com.au/5-8-inch-hex-nut-for-keg-coupler-or-tap-shank.html
and a few sundry clamps to secure the hose over the barbs.

Legend...
I was about to update my original post after stewing on this last night...

I was going to see if going with 10mm vinyl was the best option given the endpoints on the FTSS chiller coil are 3/8 " barbs & the chiller unit 3/8 " straight (post).

 

[Ballaratguy]

I just use quick connects on the tubing with bulkhead male qc on the coil

 

[stevonz]

I just use quick connects on the tubing with bulkhead male qc on the coil

any links to the products... pretty please

 

[Ballaratguy]

You would need to get compression fittings to suit your coil (possibly 10mm. Make sure that you get 1/4” bsp female fitting on the end (may have to be a male to female adaptor. You can get these from a hydraulic repair place (enzed or hydrotech or similar)
The QC can be sourced from kegland

Premium Ball Lock Disconnect (Black/Liquid)​

Sku. KL02950 | KegLand female quick connect

Liquid Ball Lock Post with 1/4inch bulkhead assembly​

Sku. KL03162 | KegLand male quick connect

 

[TwoCrows]

 

[stevonz]

that is exactly what I want... pity Newera brewing don't appear to stock these The do stock the SS brewtech version, but is $$$ Quick Disconnect Kits for FTSs - Ss Brewtech