• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

Camlock Fittings, Ball Valves, March Pump, Immersion Coil, Pump, Stick element and other stuff

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

remi

Well-Known Member
Joined
23/1/08
Messages
148
Reaction score
4
Hi all,

The COVID lockdown has prompted me to reconfigure the brewery, with a bunch of new parts on the way. So I now have a lot of stuff surplus to requirements. I'm in Brunswick in Melbourne, and would prefer local pick-up.

Obviously it is not possible to come and pick them up for now due to our lock-down, but if you want anything: let me know now and it will be ready for pick-up in a few weeks down the track.

I've added up all the bits and pieces below, and it comes to $500- on the off chance someone wants the lot, it can be had for $400 to save the hassle. Otherwise...

1. 1/2" Camlock Fittings (from Geordi Stainless steel, all in 316 SS, other than 2-3 pieces which are brand new from Cheekypeak).
- 6x Camlock Male to 1/2" BSP Male
- 9x Camlock Male to 1/2" BSP Female
- 12x Camlock Female to 1/2" Hose barb
- 4x 1/2" BSP Male to 1/2" BSP male straight connector
SOLD

2. 3 piece Ball Valves
- 2x brand new 1/2" from Nano brewery: $15 each
- 5x used from Geordi (Brookes brand valve): $20 each
- 2x used Chinese brand (Bodebao brand): $5 each
SOLD

3. March Pump 809 HS used, wired with Australian plug $100
SOLD

4. Used Celli Flow control taps, Chromed brass, Including shanks, ready to mount in your collar. Cleaned and ready to go. $30each, both for $50
SOLD

5. Copper Immersion chiller coil, with garden hose fittings, $40

6. 2400w over the side stick element, Australian plug, $40
SOLD

7. Mashmaster drip tray, $10

8. Wired fridge mate temp controller: $20
SOLD

9. 2x plastic fermenters, used thick walled 1/2" silicone hose in various lengths (4m total) and 1x20L cube, free
SOLD

IMG_0579.jpg
IMG_0580.jpg
IMG_0583.jpg
IMG_0892.jpg
IMG_0893.jpg
IMG_0887.jpg
IMG_0888.jpg
IMG_0889.jpg

IMG_0894.jpg
IMG_0890.jpg
 
Last edited:
Hi Remi,
i'll take the lot.
Meddo, happy to post the Cellis to you when all this is over.
 
Thread update:
Taps sold to Meddo
Fittings/ pump/ fermenters/ valves sold to Gollywog
Chiller coil, element and drip tray remain available
 

Latest posts

Back
Top