user 103999
Member
- Joined
- 16/2/23
- Messages
- 6
- Reaction score
- 2
Brewtools gear for sale
Location: Sydney Australia
Will post via Sendle or AUS post.
Happy for pickup as well.
B80 Pro Brewing system $2,999 (retail $3,999)
What’s included
– Complete brewing system with controller, pump, tank sensor, heaters and lid
– Malt pipe with handle and latches
– 1 pcs expanded metal filter
– 1 pcs 3-way valve
– Temperature sensor with adapter for pump line
– 5 pcs 34mm Tri Clamps with gaskets (all used for standard setup)
– 3 pcs 34mm TC blind caps
– 1 pcs dip tube, short type
– 1 pcs mash hat for spreading the wort
– 1 pcs sparge tube
– 150cm 16x25mm silicone tube
– 1 pcs 34mm TC to 19mm hose barb adapter
– O-rings for the centre pipe and dip tube
– 1 pcs Power Cable, 2 meters
Starter Pack 2 Valve Setup - $1,000 (retail $1,160) (silicon hose not included)
What’s included
- 1 pcs 3-way ball valve, TC34mm DN15
- 1 pcs Dip tube, short
- 1 pcs Counterflow Cooler, Pro
- 2 pcs TC34mm to 12mm hose barb
- 1 pcs TC34mm to 19mm hose barb, sensor holder
- 4 pcs TC34mm to 19mm hose barb
- 1 pcs Temp. Sensor, inline, M10
- 6 pcs Tri Clamp, 34mm
- 1 pcs TSP, 100g
Accessories
Laser Cut B80 Pro Filter (has pre-punched hole for overflow kit) - $120 (retail $220)
Steam Hat for B80pro - $320 (retail $420)
Medium Trubinator - $100 (retail $190)
Insulation Jacket for B80 Pro - $50 (retail $98)
3-way valves (Includes 3 gaskets) - $120 (retail $168) (2 in stock)
Hose barbs 19mm - TC 34mm - $15 each (retail $25) (2 in stock)
T Handle Paddle (Long type) ($50) (retail $80)
Adjustable Dip Tube - 34mm TC (Includes 1 gasket) - $100 (retail $145)
Tri clamp 34mm - $10 each (retail $15) (4 in stock)
Ampfibian Mini 15A to 10A Power Adapters with RCD & overload protection - $50 each (retail $90) (2 in stock)
PM me if you are interested.
As things sell I will remove them from the list.
Location: Sydney Australia
Will post via Sendle or AUS post.
Happy for pickup as well.
B80 Pro Brewing system $2,999 (retail $3,999)
What’s included
– Complete brewing system with controller, pump, tank sensor, heaters and lid
– Malt pipe with handle and latches
– 1 pcs expanded metal filter
– 1 pcs 3-way valve
– Temperature sensor with adapter for pump line
– 5 pcs 34mm Tri Clamps with gaskets (all used for standard setup)
– 3 pcs 34mm TC blind caps
– 1 pcs dip tube, short type
– 1 pcs mash hat for spreading the wort
– 1 pcs sparge tube
– 150cm 16x25mm silicone tube
– 1 pcs 34mm TC to 19mm hose barb adapter
– O-rings for the centre pipe and dip tube
– 1 pcs Power Cable, 2 meters
Starter Pack 2 Valve Setup - $1,000 (retail $1,160) (silicon hose not included)
What’s included
- 1 pcs 3-way ball valve, TC34mm DN15
- 1 pcs Dip tube, short
- 1 pcs Counterflow Cooler, Pro
- 2 pcs TC34mm to 12mm hose barb
- 1 pcs TC34mm to 19mm hose barb, sensor holder
- 4 pcs TC34mm to 19mm hose barb
- 1 pcs Temp. Sensor, inline, M10
- 6 pcs Tri Clamp, 34mm
- 1 pcs TSP, 100g
Accessories
Laser Cut B80 Pro Filter (has pre-punched hole for overflow kit) - $120 (retail $220)
Steam Hat for B80pro - $320 (retail $420)
Medium Trubinator - $100 (retail $190)
Insulation Jacket for B80 Pro - $50 (retail $98)
3-way valves (Includes 3 gaskets) - $120 (retail $168) (2 in stock)
Hose barbs 19mm - TC 34mm - $15 each (retail $25) (2 in stock)
T Handle Paddle (Long type) ($50) (retail $80)
Adjustable Dip Tube - 34mm TC (Includes 1 gasket) - $100 (retail $145)
Tri clamp 34mm - $10 each (retail $15) (4 in stock)
Ampfibian Mini 15A to 10A Power Adapters with RCD & overload protection - $50 each (retail $90) (2 in stock)
PM me if you are interested.
As things sell I will remove them from the list.
