boagesmalone
Active Member
- Joined
- 28/2/06
- Messages
- 28
- Reaction score
- 0
Does anyone use BEER GAS as opposed to CO2? And what is the difference between the two.
Cheers
Boagesmalone
Cheers
Boagesmalone
Vlad the Pale Aler said:I have found that BOC Cellamix55 was very slow and reluctant when it comes to force carbing. After doing the big shake, rattle and roll I kept the pre-cooled keg at 40 psi for about 2 days then reset the pressure to the high end of the usual dispensing pressure, about 20psi. This was using a comet 500 reg and a swingtap without a creamer. I found that the gas would not be absorbed into the beer as easily as straight co2, and the high dispensing pressure was needed to keep a good head on the beer. Things may be different with another reg and a creaming nozzle, but I went back to co2.
[post="47544"][/post]
boagesmalone said:Does anyone use BEER GAS as opposed to CO2? And what is the difference between the two.
Cheers
Boagesmalone
[post="113810"][/post]
What was aid is true, Nitrogen is not readily absorbed into solution so a hightr pressure would be needed.
I was thinking that if i got a Nitrogen bottle + reg and a c02 bottle + reg and hooked them together with a t-peice... could you make a blend that way?
Enter your email address to join: