Beer Belly Falsie SE Melbourne

[Gweedo]

I have a Beer Belly Falsie that is just sitting around and not being used, will come with S/S bulkhead and barb for your esky. It will need a 1/2"BSP ball valve (or whatever your configurations are). $50 Pick up in South East Suburbs Melb or can post for put in an 3kg express post satchel for an additional $15.00

To save the trouble of posting photos here is the link to Beer Belly Falsie https://shop.beerbelly.com.au/falsie.html

 

[mofox1]

Mate, that's perfect... Pm'd.

 

[Nullnvoid]

Oh bugger, that looks awesome, good score Mick!

 

[Gweedo]

mofox have replied

 

[mofox1]

Dammit.... From the pic on the beer belly website it looked like the outlet was at the top. My esky mash tun is just big enough to fit it in (just larger than the 32cm the falsie is described as) but won't work with the outlet on the long end, will now have to pass... 'pologies for the stuff around.

Rus... You up next?

 

[Gweedo]

no worries, so yes its back up for grabs

 

[Nullnvoid]

I shouldn't........pm coming your way.

 

[Gweedo]

hahaha........ oh but you should

have replied

 

[Gweedo]

Thought I would add a small detail that the photos on Beer Belly don't show for those that are not familiar with the Falsie. The stainless screen is mounted on top of a stainless plate and held together by a wingnut on top. So there is zero chance of grain sneaking in to the uptake pipe. The photos that are on his website don't illustrate that to well

 

[JB]

You snap this up Russ?

 

[Nullnvoid]

You snap this up Russ?

Yep sure did .

 

[huez]

Off topic but just clicking on that link to check out the beer belly falsie, it looks like they have pulled all there custom vessels from sale. To much competition from companies like blicchmann and SS brewtech maybe?

 

[Gweedo]

Nar, fella/owner at Beer Belly is a welder, that has under gone some medical condition like arthritis or something similar, don't know full story or details of it, but that limits him compared to their earlier days so he stopped with the big stuff and just cuts and presses out the small stuff.

 

[JB]

Yep sure did .

Magnificent! I have one of these & they're awesome.

Although mine does need the centre bolt welded back on after being dropped

 

[huez]

Nar, fella/owner at Beer Belly is a welder, that has under gone some medical condition like arthritis or something similar, don't know full story or details of it, but that limits him compared to their earlier days so he stopped with the big stuff and just cuts and presses out the small stuff.

Ahhh ok, unfortunate. I have a few of their things, quality stuff!