• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

100L Stainless Conical With Cooling Jacket For Sale Perth

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Hippy

Well-Known Member
Joined
7/6/10
Messages
469
Reaction score
57
100L Stainless Conical Fermenter with cooling jacket

100L capacity
1.5" tri clove outlets (dump and racking port)
20190901_101841.jpg

Thermowell
I've upgraded the valves from ball valves to butterfly valves which are easily pulled apart after each ferment for cleaning. It takes less than 5 minutes to ressemble them. I will also throw in the old ball valves.
1.5" and 3" ports on the lid (3" is great for dry hopping)
20190901_102211.jpg

Handles up to about 0.5 bar to transfer under CO2
20190901_102753.jpg

Has a cooling jacket (http://www.gotta-brew.com/products/conical-cooling-jacket.html) for maintaining temperature during ferment, and cooling at end of ferment. This can be used with either glycol or chilled water.
I am also throwing in the little submersible pump I use to circulating the cooling fluid. I usually put the pump in a 30L fermenter of water chilled in my fermenter fridge with the pump plugged into a temp controller . Set the desired ferment temp ,place controller temp probe in thermowell. When the temp rises above set temp pump kicks in and circulates cooling water. Temp contoller not included.
20190901_102008.jpg

It is also well insulated.
I've mounted the fermenter on a 700x500mm moving dolly to make it easy to move around the brewery when necessary.
20190901_101859.jpg


Cost $1200 new. I bought it second hand for $600 and have spent around $200 on upgrades and accessories so asking $600.
20190901_102348.jpg


Reluctant sale but it's just not getting used anymore as I don't brew as much as I used to . When I do brew I usually just do single batches so I don't really need this monster.

I'm based in Butler in the Northern suburbs.
 
Hey jonggy .
Apologies for the delayed response as I've had a hectic couple of weeks and my notifications seems to be turned off.
On shipping to Melbourne, I have a few guys interested here in Perth but if they don't work out I'll look into it.
As for the jacket I'm not sure as it was already on when I bought it off another member.
Hoop held up fine under pressure transfer but I use only enough pressure to push the beer out.
 
understood mate, if anyone is silly enough to pass it up in the West please update the thread and hopefully i can find a home for it.
 
understood mate, if anyone is silly enough to pass it up in the West please update the thread and hopefully i can find a home for it.
Hey mate.
This is still up for grabs if you still want it let me know.
 
Back
Top