Hippy
Well-Known Member
- Joined
- 7/6/10
- Messages
- 469
- Reaction score
- 57
I have this 100L recirculating Mash Tun With 2400W heating element.
It's nothing flash, made from the guts of an old hot water system. I built it as a prototype with the intentions of refining and welding etc. It does work, all you need is a temp controller, a stand and a pump and your in business. I used an STC 1000 with a chugger pump and have made triple batches in it. Mash efficiency isn't great ,but like I say it was a work in progress.
Comes with sight glass, thermowell, stainless mesh false bottoms and lid, as well as tubing with quick release fittings.
I've spent hundreds of dollars on it but will let it go for $150.
I'm in Butler.
It's nothing flash, made from the guts of an old hot water system. I built it as a prototype with the intentions of refining and welding etc. It does work, all you need is a temp controller, a stand and a pump and your in business. I used an STC 1000 with a chugger pump and have made triple batches in it. Mash efficiency isn't great ,but like I say it was a work in progress.
Comes with sight glass, thermowell, stainless mesh false bottoms and lid, as well as tubing with quick release fittings.
I've spent hundreds of dollars on it but will let it go for $150.
I'm in Butler.
Last edited:
