Wtb Industrial Thermometers?

[thunderleg]

Hi

Ive had a bit of a seach and a few bids on Ebay, but with no luck. Is there anyone in Oz that sells industrial thermometers online? Or retails them in Perth? I'm talking about the bi-metal probe thermometers with an integral 1/2" BSP thread.

Thanks

Ben

 

[Screwtop]

Hi

Ive had a bit of a seach and a few bids on Ebay, but with no luck. Is there anyone in Oz that sells industrial thermometers online? Or retails them in Perth? I'm talking about the bi-metal probe thermometers with an integral 1/2" BSP thread.

Thanks

Ben

[post="108744"][/post]​

Thunderleg, check OneTemp bought one BiMetallic 6" probe 100mm dial face for $44.00 Good to deal with (Brisbane office) and next day delivery. Have a look at Bindi's pics in this thread BindisPics, he has two of them. OneTemp have a Perth distributor OneTempLink

 

[coolum brewer]

You could try these:

Temperature Controls

Pyrosales

OneTemp

None are in Perth or do internet orders, but all can supply via phone or email.

Cheers
Peter

 

[thunderleg]

Thanks!

Ive just emailed the Perth contact for OneTemp. I'll see how that goes.

Cheers

Ben

 

[bindi]

Hi

Ive had a bit of a seach and a few bids on Ebay, but with no luck. Is there anyone in Oz that sells industrial thermometers online? Or retails them in Perth? I'm talking about the bi-metal probe thermometers with an integral 1/2" BSP thread.

Thanks

Ben

[post="108744"][/post]​

Thunderleg, check OneTemp bought one BiMetallic 6" probe 100mm dial face for $44.00 Good to deal with (Brisbane office) and next day delivery. Have a look at Bindi's pics in this thread BindisPics, he has two of them. OneTemp have a Perth distributor OneTempLink

[post="108746"][/post]​

OneTemp were good ordered one day arrived the next, two Bi-metal thermeters model T1213 100mm length 100mm 0c- 120c to my door for $90.00

 

[PhilS]

I Grabbed 3 from Ebay. They came from a seller in the US with both & 1/2 inch threaded. Between approx. $25 - $30 AUS + freight




& Bulkhead


edit: changed pic & no Affiliation

 

[Screwtop]

I Grabbed 3 from Ebay. They came from a seller in the US with both & 1/2 inch threaded. Between approx. $25 - $30 AUS + freight

Look good, are they 60mm dial face, how long are the probes?

 

[big d]

ive noticed grain and grape in victoria have them listed on there site.not cheap and not sure of the brand.worth a look and a call maybe.

cheers
big d

 

[PhilS]

Hello Screwtop,
They are 60mm across Dial face with actual length of probe 135mm (+ screw thread). All up 150mm in length. There is also an adjusting screw on the rear.

I remember someone from here posting the original link :lol:

 

[Linz]

like this????

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...AMEWA%3AIT&rd=1

or this

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...AMEWA%3AIT&rd=1

beerz

Linz

 

[Screwtop]

ive noticed grain and grape in victoria have them listed on there site.not cheap and not sure of the brand.worth a look and a call maybe.

cheers
big d

[post="108826"][/post]​

Reply from John at G&G to my enquiry re these thermometers

"They are Tel tru thermometers branded as fermentap, Male threaded 1/2" BSP thread, The external diameter of the face - ie including the outer ring is 80mm".

$109 with 6" probe in stainless.

 

[BrissyBrew]

I have actually had some bi-metal thermometers custom designed for brewing they are in the country, they have cleared customs, but due to a mail redirection Australia Post has misplaced them (I have been onto them) but I expect to have them within a week, shall post pics when they arrived.

I have ordered a product sample of 100 units, they have a 4inch face, custom dial, 6inch stem, 1/2 inch thread SS 304. AHB cost for the product sample 35.00 plus postage or you can pickup if you are brissy based.

 

[Vlad the Pale Aler]

I'll have one, subject to seeing a piccy.

 

[Bobby]

i am also interested. looking forward to the pics

 

[PhilS]

like this????

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...AMEWA%3AIT&rd=1

or this

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...AMEWA%3AIT&rd=1

beerz

Linz

[post="108840"][/post]​

The're the ones Linz

 

[doglet]

At the risk of hijacking this post with my own sale.......I have 2 spare dial bulkhead thermometers exactly like the ones that PhilS and Linz have linked to. I bought 6 to try and reduce my shipping costs as I wanted 3. Total cost was AUD$240. I am not trying to make any profit from these so they are $40 each. Pick up is available in Adelaide or else I can send them in the post. PM me for details.

 

[recharge]

I have actually had some bi-metal thermometers custom designed for brewing they are in the country, they have cleared customs, but due to a mail redirection Australia Post has misplaced them (I have been onto them) but I expect to have them within a week, shall post pics when they arrived.

I have ordered a product sample of 100 units, they have a 4inch face, custom dial, 6inch stem, 1/2 inch thread SS 304. AHB cost for the product sample 35.00 plus postage or you can pickup if you are brissy based.

[post="109010"][/post]​

i'll probably take a couple

:beer:

Richard

edit = make that 3 or 4

 

[Shunty]

I have actually had some bi-metal thermometers custom designed for brewing they are in the country, they have cleared customs, but due to a mail redirection Australia Post has misplaced them (I have been onto them) but I expect to have them within a week, shall post pics when they arrived.

I have ordered a product sample of 100 units, they have a 4inch face, custom dial, 6inch stem, 1/2 inch thread SS 304. AHB cost for the product sample 35.00 plus postage or you can pickup if you are brissy based.

[post="109010"][/post]​

I'll take two if you are willing to ship across the ditch

 

[sinkas]

I would also like 2 or 3.
I assume they are designed witha bulkhead fitting?

 

[BrissyBrew]

I am picking up a shipment of bi-metal thermometers tomorrow, I had a custom brewing face put on and a temperature range that is suited to brewing tasks. I shall post a pic when I have picked them up.

I shall probably sell a few on this board before putting them up on ebay.