The New Home Bar

[GMK]

I am about half way through building my Bar Room and Cellar?fermentation Room in the shed.
Thought I would share a few Photos.

I have a 9m x 6m x 2.7m high shed. I have decided to partion and fully insulate one 3m x 6m bay to become ;
- a Bar Room - 2.8m W x 3.8m L
- a Upright Cellar/Fermentation Room - 2.8m W x 1.8M

So far the internal walls have been built - the cellar is insulated and all walls built and primed ready for top coats.

First off had to attach the brewing Sign.

 

[GMK]

I am about half way through building my Bar Room and Cellar?fermentation Room in the shed.
Thought I would share a few Photos.

I have a 9m x 6m x 2.7m high shed. I have decided to partion and fully insulate one 3m x 6m bay to become ;
- a Bar Room - 2.8m W x 3.8m L
- a Upright Cellar/Fermentation Room - 2.8m W x 1.8M

So far the internal walls have been built - the cellar is insulated and all walls built and primed ready for top coats.

First off had to attach the brewing Sign.


Here is a pic of the side of the shed showing the entrance Door.
Thru the door u can see the Bar room corner.


Looking thru the entrance door - in the back ground is my 2 door display fridge.


This is a pic from the front door showing the Cellar door and corner that was seen from the the earlier photo.


This is a pic of the Cellar/Fermentation room with a lonely Fermenter.
So far with no cooling it is kept between 14.5 and 18.2 degrees.


Lastly, this the side wall - the cellar part is all ready lined.
There is over hanging beams that will support the floor above for storage...


Will post some more as it gets further along.

 

[Gout]

nice work Ken

 

[kook]

Agreed, nice work Ken.

Now its time to scour garage sales and ebay for brewerania!

 

[big d]

top stuff ken.this is the sort of project i have in mind for my shed down south once i get there.
you plan on growing your own hops in one of the rooms or the space above.

cheers
big d

 

[GMK]

i am trying to grow hops in the garden on a wire trelis.
But i still have no flowers or hop cones.

Still waiting...

 

[GMK]

OK

Just took delivery of this new stuff for the Bar - courtesy of Coopers...

Here is the range of stickers for the fridge and bar...


But the best present of all is the Brand New 6mm thick Solid Brass"Coopers" Logo.


Just need to finish the bar and then work out where to put everything.... :super:

 

[big d]

didnt know you were a coopers kit and kilo brewer gmk.there i was thinking you were a bit more ag original.

 

[GMK]

I am ORIGINAL - this is to decorate the Bar...

Painted the cellar today - used an outside acrylice - Golden Sand colour.

starting to come together...

 

[dicko]

I am ORIGINAL - this is to decorate the Bar...


starting to come together...

[post="57857"][/post]​

I'm sure both Big D and myself expected a big brass BREWINN BAROSSA logo rather than a commercial example.

Post some pics of the bar Ken when it is completed.

Cheers and good luck with your brew day on the weekend;

 

[GMK]

Thanks Dicko....

There will be some BrewInn Barossa logos - maybe not brass....

Starting the Big Brew Day Now....

 

[big d]

apologies ken if you took my comment the wrong way but i was thinking along the same lines as dicko.
if i remember correctly it wasnt that long ago that you where looking at a comercial set up for your end of the barossa.so there i am thinking that you would do something along the lines of the barossa brewinn theme.

cheers and have a great brewday

big d

 

[GMK]

Ok - Here are some more pics.

Just had the Lino Floor laid today - nothing is cheap anymore.
700.00 for 5.7m x 3m of lino laid with a 15 year warranty...

Si i have painted all the cellar/fermentation room.
Bar room Ceiling and walls
All door frames have 3 coats of varnish - started varnishing the Meranti skirting and cornice for the cellar.

Pic 1 is almost finishing painting the inside of the doors.


Pic 2 show the front with the new floor.


Pic 3 shows from inside the workshop looking out the door.


Pic 4 shows the cellar.
Have an aerater bubbling away in my Imperial Stout Extract/Partial I made up today.


Colours are Sandbelt for the top part of the wall.
Pinot Noir for the bottom.

Still a fair bit todo - waiting for the rest of the Meranti Skirting and Cornice to be delivered today.

Doing this is not Cheap - even with a Brother-in-law in the trade and getting free Chip board and MDF for the ceiling, walls and the beams...and a free bar...

Costs to date are 2,850.00 including the wiring...Not including the six tap font, dispaly fridge etc...

Hope the wife does not read this...
I think GMKenterprises needs to sell alot of stuff ...Real Soon. :super:

 

[Rex]

That looks really sweet...

Any more recent pics GMK?

 

[Batz]

Looks great Kenny

GMK enterprizes generating a few $$$ then?

I wonder what part I paid for ...the lino floor ?


Batz

 

[GMK]

Looks great Kenny

GMK enterprizes generating a few $$$ then?

I wonder what part I paid for ...the lino floor ?


Batz

[post="63393"][/post]​

Batz - the lino floor was 700.00 for 6x 3m = 18m2 = $38.88 per m2

SO i guess - u might have paid for 1m2 then...

Will post soem more pics tonight.

 

[dicko]

Way to go Ken,

Top job.

I would like to see more pics when it is finished!

Cheers

 

[big d]

certainly a lot of effort and money going into this setup ken.however at the end of the day you will get more than your monies worth of enjoyment out of it.yep more photos please.im inspired to do similar

cheers
big d

 

[GMK]

OK - As promised - here are some more pics...

This shows the Bar room with the little bar fridge that will go under the bar.


This shows the cellar/fermentation room.
I have installed the skirting and door surrounds.
Planned teh Shelving, Storage and Bench to go in here.
240 Wine Bottle Rack is being made.



This is a view from inside the Cellar/Fermentation room looking out to the Bar Area.


i have varnished all the skirting for the bar - but still flushing the ceiling panels - will need to repaint the ceiling.

 

[GMK]

OK - My BIL (Brother In Law) turned up late yesterday arvo - we worked till 8.00pm..

I now have all the cornice and skirting done in the bar room...

Here are some pics...


and teh skylight is all framed and the diffuser is in...


Still need to putty the holes - do a bit more varnishing on the meranti - install some 12mm square beading on the door frames.

Oh - finish flushing and painting the ceiling.

Next weekend my FIL gets here with the BAR!!!!