I'm running Andale florytes on my keezer with about 2m of line from keg to tap. Line is coiled and sits low in the freezer, but I run a fan anyway so stratification shouldn't be an issue.
Anyway, ever since I've had the taps, every time I use the taps after having left then say a couple of minutes between pouring, the tap will cough/splutter when I next use it. Result being that it blasts beer out the top of the glass and you end up with a sizeable head (say half inch) on the first beer. Second beer is fine. Obviously there would seem to be a pressure build up. Other than that I have no issues withy foaming, so I assume that the line length is ok. Gas is set at 8-10psi for pouring.
Any ideas how to fix this? Should I try a longer length of line? Turning the gas down further doesn't seem to make any difference.
Cheers
Anyway, ever since I've had the taps, every time I use the taps after having left then say a couple of minutes between pouring, the tap will cough/splutter when I next use it. Result being that it blasts beer out the top of the glass and you end up with a sizeable head (say half inch) on the first beer. Second beer is fine. Obviously there would seem to be a pressure build up. Other than that I have no issues withy foaming, so I assume that the line length is ok. Gas is set at 8-10psi for pouring.
Any ideas how to fix this? Should I try a longer length of line? Turning the gas down further doesn't seem to make any difference.
Cheers