SJW
As you must brew, so you must drink
- Joined
- 10/3/04
- Messages
- 3,401
- Reaction score
- 211
Took a bit but it's done. I had an old tub so it does not drain anywhere but it's better than being in the shed plus I can fill it with ice and put a bucket under to drain it. I made the frame with std 70 x 35 F10 pine, then lined the front with FC sheet as I was going to tile it with those stack tiles. Mini orb ended up cheaper. The top is the best. $99 from Bunnings it was a bit of 2.2m x 600mm acacia bench top. I ripped 200mm off the width and cut it in half for the returns. Biscuit joined them and sanded. Then hit with 5 coats of clear satin. Then polished to a high gloss. It's also on wheels. I might put doors on the back but not really needed. A few flashing LEDs and some metal beer signs and everyone's a winner. Also ran some 2.5mm 3 core flex to a couple power points so I can brew on it.
Steve
Steve
