earle
Choc wheat fiend
- Joined
- 20/3/08
- Messages
- 1,980
- Reaction score
- 1,153
Recently acquired a 9.5l keg so have knocked up this mini kegerator for it. Pretty happy with the way it has come up.
It's a 30l plastic drum inside a 60 litre plastic drum. A disc of 30mm insulation board between them at the bottom and then lots of lengths around the sides. Some corflute siliconed in to finish the top. Have added a drain to allow for ice replenishment for longer uses.
I'm going to add a circle of the insulation board under the lid. Without the lid a standard corny protrudes out the top, mainly the rubbertop as well as another 50mm of the keg. But if ice was packed in you could use it that way short term.
It's a 30l plastic drum inside a 60 litre plastic drum. A disc of 30mm insulation board between them at the bottom and then lots of lengths around the sides. Some corflute siliconed in to finish the top. Have added a drain to allow for ice replenishment for longer uses.
I'm going to add a circle of the insulation board under the lid. Without the lid a standard corny protrudes out the top, mainly the rubbertop as well as another 50mm of the keg. But if ice was packed in you could use it that way short term.