LethalCorpse
Well-Known Member
- Joined
- 19/2/07
- Messages
- 824
- Reaction score
- 8
I've got a keg that some mates knocked together years ago which has a pressure gauge on the gas inlet, and inline ballvalves on the gas and beer lines. It's also got a copper coil for use in an esky as a makeshift magic box. In true undergrad fashion, it's held together with epoxy and spit, but apparently holds pressure.
I also just got hold of a 6kg extinguisher. Sorry I could only get the one.
My question is, until I get hold of a reg and set it up properly, can I carb and dispense a beer just by using the tap and the gauge? ie, hook the gas up to the tap and ease it open until it hits carb pressure, then close it again, then while dispensing give it a charge every time the pressure gets too low. Or will the bottle pressure blow the lines and fittings to buggery?
I also just got hold of a 6kg extinguisher. Sorry I could only get the one.
My question is, until I get hold of a reg and set it up properly, can I carb and dispense a beer just by using the tap and the gauge? ie, hook the gas up to the tap and ease it open until it hits carb pressure, then close it again, then while dispensing give it a charge every time the pressure gets too low. Or will the bottle pressure blow the lines and fittings to buggery?