• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

Keezer, Kegs, CO2 complete setup Brisbane

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MrGilly

New Member
Joined
17/2/17
Messages
4
Reaction score
0
Keezer built with all quality fittings, very little use and all components about a year old apart from the chest freezer.

PLEASE SEE ALBUM OF PICS HERE

Chest freezer is a 164L Fisher & Paykel, in good condition with plenty of years service left. Also able to be converted back to a chest freezer as wiring has not been modified and temp controller just runs in line with power cord.


Keezer was built using the following components, total build at the time cost over $1000:

- Top quality Krome Dispense stainless taps - were around $100 each

- 4 tap gas manifold splitter, with separate valves and backflow prevention check valves to each line.

- 2 kegs in near new condition, always thoroughly cleaned and well maintained.

- CO2 Bottle and Regulator - bottle has only seen one refill since new. Currently empty.

- Elitech STC-1000 Temp Controller built into Jaycar Box. Works great.

- Thick pine wood collar.


Keezer will fit more kegs and taps, and plan was always for expansion which is why a 4 way manifold etc was used. All relevant gear purchased from the Loose Moose Brewing Co in Browns Plains.

Regretful sale. Not looking to separate/part out. Selling as complete.

Located in Cedar Grove. $650 ONO

cheers
Mark
 
Keezer built with all quality fittings, very little use and all components about a year old apart from the chest freezer.

PLEASE SEE ALBUM OF PICS HERE

Chest freezer is a 164L Fisher & Paykel, in good condition with plenty of years service left. Also able to be converted back to a chest freezer as wiring has not been modified and temp controller just runs in line with power cord.


Keezer was built using the following components, total build at the time cost over $1000:

- Top quality Krome Dispense stainless taps - were around $100 each

- 4 tap gas manifold splitter, with separate valves and backflow prevention check valves to each line.

- 2 kegs in near new condition, always thoroughly cleaned and well maintained.

- CO2 Bottle and Regulator - bottle has only seen one refill since new. Currently empty.

- Elitech STC-1000 Temp Controller built into Jaycar Box. Works great.

- Thick pine wood collar.


Keezer will fit more kegs and taps, and plan was always for expansion which is why a 4 way manifold etc was used. All relevant gear purchased from the Loose Moose Brewing Co in Browns Plains.

Regretful sale. Not looking to separate/part out. Selling as complete.

Located in Cedar Grove. $650 ONO

cheers
Mark
Hi Mark. Will it fit more 19l kegs in or have to use the smaller 9l kegs? It looks tight with the compressor bump
 
Fits no problems! Sits just under the collar with room to spare. I've updated the album and added a couple of pics for you.

cheers
Mark
 
Back
Top