Huge All Brand New & Unused Brewing Equipment Sale (updated list)

[FunkeBrewster]

Postage/delivery will be priced on a per item basis, otherwise its pickup in the Logan area QLD.
I can take small items to Perth as I travel for work.
I have photos and links available if you require.
So for your viewing pleasure I present to you the following items that are all brand new and totally unused (except for some fermenting gear which I have noted):

Hardware:
1 x Hugenau HU26-40 Stainless Steel Heat Exchanger - $200
1 x 304 SS 10" Coil with 2 bends 50' x 1/2" OD - $100
1 x 17" Long, 1"/1.5" Tri-Clamp Compatible Whirlpool Arm (to suit 20Gal Kettle) - $100
2 x 5500W Ripple Element, 1"/1'5" Tri-Clamp Compatible SS - $90 each
1 x Lauterhexe Filter Kit (NPT) 120cm Long - $65
3 x 3" Long BCS-460/462 Temp Probe w/ 1"/1.5" Tri-Clamp Compatible & 8ft Lead - $32.50each
3 x 3" Long BCS-460/462 Temp Probe w/ 1"/1.5" Tri-Clamp Compatible & M12 Quick Connect - $32.50 each

Tri-Clamp Fittings:
1 x 1.5" Tri-Clamp Wort Strainer w/ 3" OD Body, Rigid Element w/ 5mm Holes & 0.4mm Mesh Sock - $100
3 x 1"/1.5" Tri-Clamp Pickup Tube (Dual Flange) - $10each
3 x 1"/1.5" Tri-Clamp Barbed 90deg - $5 each
12 x 1"/1.5" Tri-Clamp Barbed Straight - $3 each
12 x 1"/1.5" Tri-Clamps - $5 each
8 x 1"/1.5" Tri-Clamp Silicone Gaskets - $1 each
16 x 1"/1.5" Tri-Clamp Short Ferrules - $2 each

Fermenting/Measuring & Testing:
1 x 250ml Graduated Marking Borosilicate Glass Test Jar - $15
2 x 5Lt Plastic Measuring Jug - $12.50
1 x Refractometer Specific Gravity & 0-32 Brix w/ATC & Case - $30
1 x Triple Scale Hydrometer - $10
2 x 3000ml Erlenmeyer Flask - $15
1 x Bottle Tree (90 Bottle Capacity) USED - $25
1 x Bottle Tree (70 Bottle Capacity) USED - $15
1 x Brew Cellar Fermenter Heating Pad USED - $10

Electrical/Electronics:
1 x IP66 HD Galvanised Metal Enclosure Switchboard 400mm x 500mm x 200mm - $100
1 x IP66 HD Galvanised Metal Enclosure Switchboard 300mm x 400mm x 200mm - $75
1 x Eaton NO 20A 6.5kW IP65 2 Pole Panel Mount Non Fused Isolator Switch - $40
1 x Conrad Aluminium Heatsink 350mm x 151mm x 48mm - $40
2 x Hager 250V 25A 1 pole NO Contact - $15 each
3 x 250V 20A NEMA L6-20 Flanged Twist-Lock Receptacle - $20 each
2 x 250V 30A NEMA L6-30 Flanged Twist-Lock Plug - $20 each
3 x 250V 20A NEMA L6-20P Twist-Lock Locking Plug - $20 each
3 x 250V 30A NEMA L6-30P Twist-Lock Plug - $20 each
2 x 250V 30A NEMA L6-30R Twist lock Receptacle - $20 each
2 x 24-280VAC to 3-32VDC 40A SSR (RS Pro) - $40 each
7 x 24-280VAC to 3-32VDC 40A SSR (Fake Fotek but suitable for lower rated loads) - $5 each
1 x Female Cat5e RJ45 Connector, Straight, Cable Mount (Neutrik)- $10
10 x 3 Way Cable Mount XLR Connector, Male, Silver Plated Contacts, 250VAC (RS Pro) - $1 each
10 x 3 Way Panel Mount XLR Connector, Female, Tin Plated Contacts (Amphenol)- $2 each
1 x 230-400VAC to 115VAC 63VA Panel Mount Transformer (Legrand 383-308) - $50
1 x 125VAC 15A DIN Rail Mount Dual Outlet - $15
1 x TP-Link TL-WR700N 150Mbps 1-Port 10/100 Wireless N Router (USA plug) - $10
1 x Telemecanique/Schneider 2 Position Toggle Switch ZB5 AD29 - $3
5 x 400mm Long 35mm Wide Slotted Metal DIN Rail - $15
5 x Schneider 3 Position Selector Switch (22mm Cutout) (ZB5AD3) - $15 each
5 x 220VAC White LED (22mm Cutout) - $2.50 each
3 x 220VAC Blue LED (22mm Cutout) - $2.50 each
2 x 220VAC Orange LED (22mm Cutout) - $2.50 each
1 x 220VAC Green LED (22mm Cutout) - $2.50 each
1 x 220VAC Red LED (22mm Cutout) - $2.50 each
1 x Schneider Green Non Illuminated Plastic Push Button (ZB5AH03) - $10
1 x Schneider Red Non Illuminated Plastic Push Button (ZB5AH04) - $10
1 x Schneider 2 Direction & Stop Push Button (ZB5AA71114) - $15
1 x Schneider Potentiometer Head w/ Contact Base (22mm Cut Out) (ZB5AD922) - $75
1 x Schneider Maintained Push Button Head (22mm Cut Out) (ZB5AD28) - $30
10 x Schneider Mounting Collars (ZB5AZ009) - $4 each
12 x 40mm x 30mm x 600mm Plastic Cable Ducting w/ Covers - $5 each
* I have many NO & NC contacts for the above switches and buttons.
* I have coloured wiring, heat shrink, ferrules, glands & terminal blocks

 

[Mitchpaul]

Hi. Are 5.5 kw elements stillavail? Cheers paul

 

[FunkeBrewster]

Hi. Are 5.5 kw elements stillavail? Cheers paul

Yes they are still available mate.
Cheers [emoji106]

 

[Chappo]

Can I grab (if still available) -
2 x 1"/1.5" Tri-Clamp Barbed 90deg - $5 each
2 x 1"/1.5" Tri-Clamp Barbed Straight - $3 each
4 x 1"/1.5" Tri-Clamps - $5 each
4 x 1"/1.5" Tri-Clamp Silicone Gaskets - $1 each
4 x 1"/1.5" Tri-Clamp Short Ferrules - $2 each

 

[Chappo]

And 1-off 3" Long BCS-460/462 Temp Probe w/ 1"/1.5" Tri-Clamp Compatible & M12 Quick Connect

 

[Vrtigo]

Hi Funke, looks like you were planning a control panel build - do you have a link to what you were trying to make? I'm looking at putting something together myself so may be able to take a load of those components at once.

 

[fcmcg]

is this still avail ? With postage to Melb ?
1 x 1.5" Tri-Clamp Wort Strainer w/ 3" OD Body, Rigid Element w/ 5mm Holes & 0.4mm Mesh Sock - $100
also will need tro-clamps and gaskets

 

[FunkeBrewster]

Can I grab (if still available) -
2 x 1"/1.5" Tri-Clamp Barbed 90deg - $5 each
2 x 1"/1.5" Tri-Clamp Barbed Straight - $3 each
4 x 1"/1.5" Tri-Clamps - $5 each
4 x 1"/1.5" Tri-Clamp Silicone Gaskets - $1 each
4 x 1"/1.5" Tri-Clamp Short Ferrules - $2 each

Hi Chappo.

Apologise for delay.
Unfortunately all I have for your above list is:

2 x 1"/1.5" Tri-Clamp Barbed 90deg - $5 each
2 x 1"/1.5" Tri-Clamp Barbed Straight - $3 each
1 x 1"/1.5" Tri-Clamp Short Ferrules - $2 each

Let me know if you are wanting still and your postcode and we organise for you.

Cheers,
Brad

 

[FunkeBrewster]

is this still avail ? With postage to Melb ?
1 x 1.5" Tri-Clamp Wort Strainer w/ 3" OD Body, Rigid Element w/ 5mm Holes & 0.4mm Mesh Sock - $100
also will need tro-clamps and gaskets

Yes mate I still have this.
I only have 1 tri-clamp with and no gaskets left.

Let me know.

Brad

 

[fcmcg]

Yes mate I still have this.
I only have 1 tri-clamp with and no gaskets left.

Let me know.

Brad

I’ll take it and the tri clamp
Postage to Seabrook in melb 3028
I’ll pm you

 

[PuffinPunch]

1 x 304 SS 10" Coil with 2 bends 50' x 1/2" OD - $100

Heya Brad

Is this one still available, and if so, do you know the LxWxH dimensions off hand? I'm looking to make a jockey box and this might be handy for it, but I'd need to check it would fit in an esky.

 

[FunkeBrewster]

Heya Brad

Is this one still available, and if so, do you know the LxWxH dimensions off hand? I'm looking to make a jockey box and this might be handy for it, but I'd need to check it would fit in an esky.

Sorry mate this has been sold

 

[Chappo]

Brad - Can you confirm the 1-off 3" Long BCS-460/462 Temp Probe w/ 1"/1.5" Tri-Clamp Compatible & M12 Quick Connect has been sold?

 

[FunkeBrewster]

Brad - Can you confirm the 1-off 3" Long BCS-460/462 Temp Probe w/ 1"/1.5" Tri-Clamp Compatible & M12 Quick Connect has been sold?

Chappy I have 3 of these temp probes with quick disconnect, plus another 3 without quick disconnect (8 foot long cable).
I've got 1 put aside for you with the other items.

Can I get you to PM me mate as its easier to keep tabs on whats going where and to who.

Cheers,
Brad

 

[FunkeBrewster]

Hi Funke, looks like you were planning a control panel build - do you have a link to what you were trying to make? I'm looking at putting something together myself so may be able to take a load of those components at once.

Hi mate.
I don't have a link to what I was planning on building as it was just concepts taken from various builds I had seen across different forums, but I guess the basis of it and many others is the KAL Electric Brewery setup.
The difference between his and what I had planned, was that mine would have more automation built into it by utilising the BCS-462 and a touchscreen.
This would then allow further automation at a later date to include electric/pneumatic valves.
Initially it was going to control 2 elements and 3 pumps via 3 position switches (manual/off/auto) with temp sensing on the input and output sides controlled by the BCS-462.
Obviously this would all be housed in a metallic enclosure with all circuits protected.

Here is a dropbox link to photos of the components I have. I will be culling some items this week as some sales are made and for ones that have already been made, been a bit slack with it.

Brad

 

[breadenhound]

Heya Brad

Is this one still available, and if so, do you know the LxWxH dimensions off hand? I'm looking to make a jockey box and this might be handy for it, but I'd need to check it would fit in an esky.

Ahh I wanted this for jockey as well :/

 

[Elmar]

Hello
Is the Lauterhexe still available?
If yes, how much postage?
Thanks very much

 

[FunkeBrewster]

Hello
Is the Lauterhexe still available?
If yes, how much postage?
Thanks very much

It’s sold mate