Help Support Aussie Homebrewer by donating using the link above.
  1. Brewer's Friend is having an open giveaway, ends soon, so enter now!

    Click Here to Enter Now!
    Dismiss Notice

Huge All Brand New & Unused Brewing Equipment Sale (updated list)

Discussion in 'Buy and Sell' started by FunkeBrewster, 25/2/18.

 

  1. FunkeBrewster

    Active Member

    Joined:
    29/7/16
    Messages:
    31
    Likes Received:
    3
    Gender:
    Male
    Posted 25/2/18
    Postage/delivery will be priced on a per item basis, otherwise its pickup in the Logan area QLD.
    I can take small items to Perth as I travel for work.
    I have photos and links available if you require.
    So for your viewing pleasure I present to you the following items that are all brand new and totally unused (except for some fermenting gear which I have noted):

    Hardware:
    1 x Hugenau HU26-40 Stainless Steel Heat Exchanger - $200
    1 x 304 SS 10" Coil with 2 bends 50' x 1/2" OD - $100
    1 x 17" Long, 1"/1.5" Tri-Clamp Compatible Whirlpool Arm (to suit 20Gal Kettle) - $100
    2 x 5500W Ripple Element, 1"/1'5" Tri-Clamp Compatible SS - $90 each
    1 x Lauterhexe Filter Kit (NPT) 120cm Long - $65
    3 x 3" Long BCS-460/462 Temp Probe w/ 1"/1.5" Tri-Clamp Compatible & 8ft Lead - $32.50each
    3 x 3" Long BCS-460/462 Temp Probe w/ 1"/1.5" Tri-Clamp Compatible & M12 Quick Connect - $32.50 each

    Tri-Clamp Fittings:
    1 x 1.5" Tri-Clamp Wort Strainer w/ 3" OD Body, Rigid Element w/ 5mm Holes & 0.4mm Mesh Sock - $100
    3 x 1"/1.5" Tri-Clamp Pickup Tube (Dual Flange) - $10each
    3 x 1"/1.5" Tri-Clamp Barbed 90deg - $5 each
    12 x 1"/1.5" Tri-Clamp Barbed Straight - $3 each
    12 x 1"/1.5" Tri-Clamps - $5 each
    8 x 1"/1.5" Tri-Clamp Silicone Gaskets - $1 each
    16 x 1"/1.5" Tri-Clamp Short Ferrules - $2 each

    Fermenting/Measuring & Testing:
    1 x 250ml Graduated Marking Borosilicate Glass Test Jar - $15
    2 x 5Lt Plastic Measuring Jug - $12.50
    1 x Refractometer Specific Gravity & 0-32 Brix w/ATC & Case - $30
    1 x Triple Scale Hydrometer - $10
    2 x 3000ml Erlenmeyer Flask - $15
    1 x Bottle Tree (90 Bottle Capacity) USED - $25
    1 x Bottle Tree (70 Bottle Capacity) USED - $15
    1 x Brew Cellar Fermenter Heating Pad USED - $10

    Electrical/Electronics:
    1 x IP66 HD Galvanised Metal Enclosure Switchboard 400mm x 500mm x 200mm - $100
    1 x IP66 HD Galvanised Metal Enclosure Switchboard 300mm x 400mm x 200mm - $75
    1 x Eaton NO 20A 6.5kW IP65 2 Pole Panel Mount Non Fused Isolator Switch - $40
    1 x Conrad Aluminium Heatsink 350mm x 151mm x 48mm - $40
    2 x Hager 250V 25A 1 pole NO Contact - $15 each
    3 x 250V 20A NEMA L6-20 Flanged Twist-Lock Receptacle - $20 each
    2 x 250V 30A NEMA L6-30 Flanged Twist-Lock Plug - $20 each
    3 x 250V 20A NEMA L6-20P Twist-Lock Locking Plug - $20 each
    3 x 250V 30A NEMA L6-30P Twist-Lock Plug - $20 each
    2 x 250V 30A NEMA L6-30R Twist lock Receptacle - $20 each
    2 x 24-280VAC to 3-32VDC 40A SSR (RS Pro) - $40 each
    7 x 24-280VAC to 3-32VDC 40A SSR (Fake Fotek but suitable for lower rated loads) - $5 each
    1 x Female Cat5e RJ45 Connector, Straight, Cable Mount (Neutrik)- $10
    10 x 3 Way Cable Mount XLR Connector, Male, Silver Plated Contacts, 250VAC (RS Pro) - $1 each
    10 x 3 Way Panel Mount XLR Connector, Female, Tin Plated Contacts (Amphenol)- $2 each
    1 x 230-400VAC to 115VAC 63VA Panel Mount Transformer (Legrand 383-308) - $50
    1 x 125VAC 15A DIN Rail Mount Dual Outlet - $15
    1 x TP-Link TL-WR700N 150Mbps 1-Port 10/100 Wireless N Router (USA plug) - $10
    1 x Telemecanique/Schneider 2 Position Toggle Switch ZB5 AD29 - $3
    5 x 400mm Long 35mm Wide Slotted Metal DIN Rail - $15
    5 x Schneider 3 Position Selector Switch (22mm Cutout) (ZB5AD3) - $15 each
    5 x 220VAC White LED (22mm Cutout) - $2.50 each
    3 x 220VAC Blue LED (22mm Cutout) - $2.50 each
    2 x 220VAC Orange LED (22mm Cutout) - $2.50 each
    1 x 220VAC Green LED (22mm Cutout) - $2.50 each
    1 x 220VAC Red LED (22mm Cutout) - $2.50 each
    1 x Schneider Green Non Illuminated Plastic Push Button (ZB5AH03) - $10
    1 x Schneider Red Non Illuminated Plastic Push Button (ZB5AH04) - $10
    1 x Schneider 2 Direction & Stop Push Button (ZB5AA71114) - $15
    1 x Schneider Potentiometer Head w/ Contact Base (22mm Cut Out) (ZB5AD922) - $75
    1 x Schneider Maintained Push Button Head (22mm Cut Out) (ZB5AD28) - $30
    10 x Schneider Mounting Collars (ZB5AZ009) - $4 each
    12 x 40mm x 30mm x 600mm Plastic Cable Ducting w/ Covers - $5 each
    * I have many NO & NC contacts for the above switches and buttons.
    * I have coloured wiring, heat shrink, ferrules, glands & terminal blocks

    5500W Elemements.jpg Barbed Angles.jpg Heat Ex.jpg Lauterhexe2.jpg Pickup Tube2.jpg Short ferrules.jpg SS Coil.jpg Whirlpool Arm.jpg Wort Strainer.jpg
     
  2. Mitchpaul

    Member

    Joined:
    25/6/15
    Messages:
    16
    Likes Received:
    2
    Gender:
    Male
    Posted 7/4/18
    Hi. Are 5.5 kw elements stillavail? Cheers paul
     
  3. FunkeBrewster

    Active Member

    Joined:
    29/7/16
    Messages:
    31
    Likes Received:
    3
    Gender:
    Male
    Posted 7/4/18
    Yes they are still available mate.
    Cheers
     
  4. Chappo

    Member

    Joined:
    21/3/18
    Messages:
    14
    Likes Received:
    4
    Gender:
    Male
    Location:
    Perth
    Posted 30/4/18
    Can I grab (if still available) -
    2 x 1"/1.5" Tri-Clamp Barbed 90deg - $5 each
    2 x 1"/1.5" Tri-Clamp Barbed Straight - $3 each
    4 x 1"/1.5" Tri-Clamps - $5 each
    4 x 1"/1.5" Tri-Clamp Silicone Gaskets - $1 each
    4 x 1"/1.5" Tri-Clamp Short Ferrules - $2 each
     
  5. Chappo

    Member

    Joined:
    21/3/18
    Messages:
    14
    Likes Received:
    4
    Gender:
    Male
    Location:
    Perth
    Posted 30/4/18
    And 1-off 3" Long BCS-460/462 Temp Probe w/ 1"/1.5" Tri-Clamp Compatible & M12 Quick Connect
     
  6. Vrtigo

    Active Member

    Joined:
    10/3/09
    Messages:
    37
    Likes Received:
    4
    Gender:
    Male
    Location:
    Melbourne
    Posted 30/4/18
    Hi Funke, looks like you were planning a control panel build - do you have a link to what you were trying to make? I'm looking at putting something together myself so may be able to take a load of those components at once.
     
  7. fcmcg

    I had lotsa barrels on the old AHB..

    Joined:
    3/9/07
    Messages:
    1,524
    Likes Received:
    135
    Gender:
    Male
    Location:
    Melbourn's West
    Home Page:
    Posted 1/5/18
    is this still avail ? With postage to Melb ?
    1 x 1.5" Tri-Clamp Wort Strainer w/ 3" OD Body, Rigid Element w/ 5mm Holes & 0.4mm Mesh Sock - $100
    also will need tro-clamps and gaskets
     
  8. FunkeBrewster

    Active Member

    Joined:
    29/7/16
    Messages:
    31
    Likes Received:
    3
    Gender:
    Male
    Posted 2/5/18
    Hi Chappo.

    Apologise for delay.
    Unfortunately all I have for your above list is:

    2 x 1"/1.5" Tri-Clamp Barbed 90deg - $5 each
    2 x 1"/1.5" Tri-Clamp Barbed Straight - $3 each
    1 x 1"/1.5" Tri-Clamp Short Ferrules - $2 each

    Let me know if you are wanting still and your postcode and we organise for you.

    Cheers,
    Brad
     
  9. FunkeBrewster

    Active Member

    Joined:
    29/7/16
    Messages:
    31
    Likes Received:
    3
    Gender:
    Male
    Posted 2/5/18
    Yes mate I still have this.
    I only have 1 tri-clamp with and no gaskets left.

    Let me know.

    Brad
     
  10. fcmcg

    I had lotsa barrels on the old AHB..

    Joined:
    3/9/07
    Messages:
    1,524
    Likes Received:
    135
    Gender:
    Male
    Location:
    Melbourn's West
    Home Page:
    Posted 2/5/18
    I’ll take it and the tri clamp
    Postage to Seabrook in melb 3028
    I’ll pm you
     
  11. PuffinPunch

    Member

    Joined:
    3/3/17
    Messages:
    9
    Likes Received:
    0
    Gender:
    Male
    Location:
    Brisbane
    Posted 2/5/18
    Heya Brad

    Is this one still available, and if so, do you know the LxWxH dimensions off hand? I'm looking to make a jockey box and this might be handy for it, but I'd need to check it would fit in an esky.
     
  12. FunkeBrewster

    Active Member

    Joined:
    29/7/16
    Messages:
    31
    Likes Received:
    3
    Gender:
    Male
    Posted 2/5/18
    Sorry mate this has been sold
     
  13. Chappo

    Member

    Joined:
    21/3/18
    Messages:
    14
    Likes Received:
    4
    Gender:
    Male
    Location:
    Perth
    Posted 2/5/18
    Brad - Can you confirm the 1-off 3" Long BCS-460/462 Temp Probe w/ 1"/1.5" Tri-Clamp Compatible & M12 Quick Connect has been sold?
     
  14. FunkeBrewster

    Active Member

    Joined:
    29/7/16
    Messages:
    31
    Likes Received:
    3
    Gender:
    Male
    Posted 2/5/18
    Chappy I have 3 of these temp probes with quick disconnect, plus another 3 without quick disconnect (8 foot long cable).
    I've got 1 put aside for you with the other items.

    Can I get you to PM me mate as its easier to keep tabs on whats going where and to who.

    Cheers,
    Brad
     
  15. FunkeBrewster

    Active Member

    Joined:
    29/7/16
    Messages:
    31
    Likes Received:
    3
    Gender:
    Male
    Posted 2/5/18
    Hi mate.
    I don't have a link to what I was planning on building as it was just concepts taken from various builds I had seen across different forums, but I guess the basis of it and many others is the KAL Electric Brewery setup.
    The difference between his and what I had planned, was that mine would have more automation built into it by utilising the BCS-462 and a touchscreen.
    This would then allow further automation at a later date to include electric/pneumatic valves.
    Initially it was going to control 2 elements and 3 pumps via 3 position switches (manual/off/auto) with temp sensing on the input and output sides controlled by the BCS-462.
    Obviously this would all be housed in a metallic enclosure with all circuits protected.

    Here is a dropbox link to photos of the components I have. I will be culling some items this week as some sales are made and for ones that have already been made, been a bit slack with it.

    Brad
     
  16. breadenhound

    Pro

    Joined:
    23/4/09
    Messages:
    60
    Likes Received:
    1
    Gender:
    Male
    Home Page:
    Posted 4/5/18

    Ahh I wanted this for jockey as well :/
     
  17. Elmar

    New Member

    Joined:
    29/11/16
    Messages:
    4
    Likes Received:
    0
    Posted 10/6/18
    Hello
    Is the Lauterhexe still available?
    If yes, how much postage?
    Thanks very much
     
  18. FunkeBrewster

    Active Member

    Joined:
    29/7/16
    Messages:
    31
    Likes Received:
    3
    Gender:
    Male
    Posted 12/6/18
    It’s sold mate
     

Share This Page