I have a custom built system that has been packed up on a shelf for over 12 months and need the space. Ive got all the pieces to either set this up as a 3v or 2v system and my build notes to assist with the linux side of things.
EDITED POST - Itemized list and more photos provided. Will add remainder of photos in replys
Includes:
Id like to keep things together as much as possible but if something interests you as an individual item let me know.
Message or text me 0406587430
EDITED POST - Itemized list and more photos provided. Will add remainder of photos in replys
Includes:
| 1 | x | Craftbeer Pi - Custom Control Panel | 10amp circuit input - Powers computer, pumps, fermenter 20amp circuit input - powers 4500w heating element Safety switches for each circuit Rasperby Pi AC/DC Converters Relay Board Quality Wago Connectors Quality color coded neutic connectors rated at 20amp Have a box of spare electrical componenets left over |
| 1 | x | 4500w Heating element | Prewired to neutic connector 2.5" triclamp |
| 1 | x | S304 counter flow chiller | 1.5" triclamp wort inlet/outlet 0.5" male camlock water inlet/outlet can be reconfigured |
| 1 | x | SS304 false bottom to suit 70L pots | 445mm outside diameter 65mm high |
| 1 | x | SS304 hop basket | |
| 1 | x | 70L Mashtun | 465mm outside diameter 465mm high Insulated with 10mm thick formshield sides, top and bottom 1.5" Bulkhead at top (Recirc - have eithier auto sparge or lock line) 1.5" Thermowell bulkhead in side to sit below false bottom 1" Center bottom drain hole promotes even suction through grain bed |
| 1 | x | 70L Kettle | 465mm outside diameter 465mm high Insulated with 10mm thick formshield sides, top and bottom 1.5" Bulkhead at top (recirc - have the whirlpool attachment) 1.5" Thermowell bulkhead in side 2.5" Heating element bulkhead in bottom side (suit element above) 1" Off center bottom drain hole promets whirlpool |
| 1 | x | SS304 mash paddle | 880 long |
| 2 | x | SS hose floats | suits 0.5" silicone hose |
| 2 | x | 1.5" sample points | suits 1.5" triclamp |
| 1 | x | 2.5" triclamp bulkhead | |
| 1 | x | 1.5" triclamp to 0.5" threaded through tank fitting | |
| 1 | x | 1.5" triclamp bulkhead | |
| 8 | x | 1.5" triclamp to 0.5" hose barb | to suit 3/4" hose |
| 3 | x | 1.5" triclamp to 0.25" hose barb | to suit 1/2" hose |
| 4 | x | 1.5" triclamp to 0.5 femal thread | |
| 2 | x | thermowell connectors | |
| 1 | x | bag of triclamp seals | Silcone is more forgiving than the rigid seals |
| 1 | x | 1/2" locline recirc | with 1.5" triclamp connector |
| 1 | x | 25mm whirlpool dropper | gets below wort level and creates nice whirlpool 1.5" triclamp |
| 6 | x | 100mm long 3/4" sspipe | 1.5" triclamp |
| 2 | x | 150mm long 3/4" sspipe | 1.5" triclamp |
| 2 | x | 200mm long 3/4" sspipe | 1.5" triclamp |
| 2 | x | 300mm long 3/4" sspipe | 1.5" triclamp |
| 8 | x | 0.75" equal tee | 50mm x 100mm 1.5" triclamp |
| 4 | x | 0.75" 90 degree elbow | 50mm 1.5" triclamp |
| 4 | x | 1" to 1/2" reducer | 85mm long |
| 1 | x | 0.75" equal cross | 100mm x 100mm 1.5" triclamp |
| 42 | x | 1.5" triclamps | |
| 8 | x | 0.75" butterfly valve | 1.5" triclamp sanitary |
| 2 | x | 0.75" 3 way ball valve | 1.5" triclamp |
| 2 | x | 0.75" diaphragm valve | 1.5" triclamp |
| 2 | x | 0.75" sight glass | 1.5" triclamp |
| 1 | x | 24v to 12v ac-dc converter | |
| 2 | x | 65watt mag flow pumps | steel heads and 1.5" triclamp connectors |
| 2 | x | kegland pids | |
| 1 | x | mashmaster mill master mill and hopper | |
| 1 | x | high tourq mill motor | |
| 1 | x | Magnetic stirer | |
| 2 | x | boxes misc brewing stuff | heat belt, fittings, auto sparge, refractometer, ph meter, chemicals, bubblers, caps |
| 1 | x | bottle capper | |
| 1 | x | bunch of " threadded stuff | 25w mag drive pumps with steel heads (bit old looking but serviceable) fittings, camlocks, thermowells, elbows, tees, hose barbs, nipples, etc ball valves |
| 2 | x | kegland heating elements | |
| 1 | x | pond pump |
Id like to keep things together as much as possible but if something interests you as an individual item let me know.
Message or text me 0406587430
Attachments
Last edited:
