• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

FS - Melbourne Clearout

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sean_0

Well-Known Member
Joined
20/12/09
Messages
148
Reaction score
7
Hi all,

All items located in Brunswick VIC.

Haven't brewed in over two years now so I'm getting rid of everything. Had a pretty decent setup so loads of stuff available. I'll put up everything as I pull it out from where it's hiding.

To start:

  • King keg 2.6L CO2 cylinder - empty - $100
  • SS Beer Gun with connection - $40
  • Tuesco Dual regulator (slight damage to tank gauge, but all working perfectly) - $75
keg_reg_tap.jpg

  • 30 Plate Chiller (bought from grape and grain) - $90
chiller.jpg

  • Monster Mill with homemade hopper (takes about 4kg grain) - $100
mill.jpg
hopper.jpg

  • SS Brewing technologies brewbucket - as new - $175
brewbucket.jpg
brewbucket_inside.jpg


  • Oxygenation Kit (reg, tank, filter & stone) - $70
oxygenation.jpg

  • stir plate - $25
stir_plate.jpg

  • Fully assembled and working braudino (matho's controller) - $75
  • Gryphon hermit coil in housing - $60
hermit_brauduino.jpg

Not pictured: Full 50L 3V system on rolling rig, grain storage bins. Lots of silicone hosing, misc fittings, thermometers glassware etc.
 
Dam i just bought a herm ot coil too. Thats is ridiculously cheap. I think ill take the mathos control too
 
Nice one nosco - reg, co2 and brauduino are yours. PM me to arrange pickup
 
Sorry grumpy paul, got nosco posted about 3mins before your PM so he's got it.
 
sean_0 said:
Hi all,

All items located in Brunswick VIC.

Haven't brewed in over two years now so I'm getting rid of everything. Had a pretty decent setup so loads of stuff available. I'll put up everything as I pull it out from where it's hiding.

To start:

  • King keg 2.6L CO2 cylinder - empty - $100
  • SS Beer Gun with connection - $40
  • Tuesco Dual regulator (slight damage to tank gauge, but all working perfectly) - $75
attachicon.gif
keg_reg_tap.jpg

  • 30 Plate Chiller (bought from grape and grain) - $90
attachicon.gif
chiller.jpg

  • Monster Mill with homemade hopper (takes about 4kg grain) - $100
attachicon.gif
mill.jpg
attachicon.gif
hopper.jpg

  • SS Brewing technologies brewbucket - as new - $175
attachicon.gif
brewbucket.jpg
attachicon.gif
brewbucket_inside.jpg


  • Oxygenation Kit (reg, tank, filter & stone) - $70
attachicon.gif
oxygenation.jpg

  • stir plate - $25
attachicon.gif
stir_plate.jpg

  • Fully assembled and working braudino (matho's controller) - $75
  • Gryphon hermit coil in housing - $60
attachicon.gif
hermit_brauduino.jpg

Not pictured: Full 50L 3V system on rolling rig, grain storage bins. Lots of silicone hosing, misc fittings, thermometers glassware etc.
HERMIT Coil sold to Nebes
 
Done, PM for pickup

sean_0 said:
Hi all,

All items located in Brunswick VIC.

Haven't brewed in over two years now so I'm getting rid of everything. Had a pretty decent setup so loads of stuff available. I'll put up everything as I pull it out from where it's hiding.

To start:

  • King keg 2.6L CO2 cylinder - empty - $100
  • SS Beer Gun with connection - $40
  • Tuesco Dual regulator (slight damage to tank gauge, but all working perfectly) - $75
attachicon.gif
keg_reg_tap.jpg

  • 30 Plate Chiller (bought from grape and grain) - $90
attachicon.gif
chiller.jpg

  • Monster Mill with homemade hopper (takes about 4kg grain) - $100
attachicon.gif
mill.jpg
attachicon.gif
hopper.jpg

  • SS Brewing technologies brewbucket - as new - $175
attachicon.gif
brewbucket.jpg
attachicon.gif
brewbucket_inside.jpg


  • Oxygenation Kit (reg, tank, filter & stone) - $70
attachicon.gif
oxygenation.jpg

  • stir plate - $25
attachicon.gif
stir_plate.jpg

  • Fully assembled and working braudino (matho's controller) - $75
  • Gryphon hermit coil in housing - $60
attachicon.gif
hermit_brauduino.jpg

Not pictured: Full 50L 3V system on rolling rig, grain storage bins. Lots of silicone hosing, misc fittings, thermometers glassware etc.
 
Sean I'll send you a pm to organise pick up for the items.
 
Back
Top