huez
Well-Known Member
I have a used control panel enclosure that has holes cut for 22mm switches and also holes cut for neutrik style D connectors. They basically accept the entire neutrik range, powercon, xlr, ethernet and so on. There's some studs welded on the mounting tray but they're easily cut off with a grinder. I'll have to double check the dimensions when i get a chance.
Also have a monster mill hopper that has been modified to fit a mashmaster mill. You could take the mdf plate off and it will still fit a monster mill but it won't be fully enclosed as i've cut the sides off it. Makes sense if you've seen the actual monster mill hopper.
$30 for the enclosure and $40 for the hopper. Pickup from Marrickville NSW.
Also have a monster mill hopper that has been modified to fit a mashmaster mill. You could take the mdf plate off and it will still fit a monster mill but it won't be fully enclosed as i've cut the sides off it. Makes sense if you've seen the actual monster mill hopper.
$30 for the enclosure and $40 for the hopper. Pickup from Marrickville NSW.
