sponge
Dungeon O' Sponge Brewery
- Joined
- 12/1/08
- Messages
- 4,258
- Reaction score
- 711
Brewing Gear for sale
1 x 130L Cheeky Peak SS Pot w/ etched volume markings, SS ball valves, 2 x 5.5kW single phase low-density elements - $100
1 x 100L (from memory, possibly 90L) SS pot with legs welded and mesh screen on base as 'malt pipe'. I use a large BIAB bag (included) from craftbrewer inside as the mesh screen is a little large by itself - $50
1 x 125kg/250kg Giant electric hoist - $80
1 x control panel w/ 2 x ramp/soak PID controllers (Auber SYL-3252P), 2 x 25A SSRs, E-stop with full load contactor, cabling, 60A heatsink, powder coated panel, and two additional 10A outlets (which I used for a pump and a fan in the brew shed).
I had 3-phase/63A power to the brew shed, so would probably suit someone with a similar capacity, although the control panel is wired for single-phase appliances (but spread across the 3 phases) so could be re-wired for a decent single phase supply if need be, or used on smaller elements.
Note: The control panel would need to be wired up by an electrician. - $270
1 x in-line chugger pump - $100
1 x keg king pump - $50
1 x 50lt keggle HWT w/ sight glass, ball valve and 2.2kW element - $100
1 x Dual roller grain mill with hopper - $80
1 x beer filter (brand new) - $20
1 x hydraulic hole punch - $40
Pickup from Southern Highlands, NSW
Happy to answer any questions you might have.
Please see photos in posts below.
1 x 130L Cheeky Peak SS Pot w/ etched volume markings, SS ball valves, 2 x 5.5kW single phase low-density elements - $100
1 x 100L (from memory, possibly 90L) SS pot with legs welded and mesh screen on base as 'malt pipe'. I use a large BIAB bag (included) from craftbrewer inside as the mesh screen is a little large by itself - $50
1 x 125kg/250kg Giant electric hoist - $80
1 x control panel w/ 2 x ramp/soak PID controllers (Auber SYL-3252P), 2 x 25A SSRs, E-stop with full load contactor, cabling, 60A heatsink, powder coated panel, and two additional 10A outlets (which I used for a pump and a fan in the brew shed).
I had 3-phase/63A power to the brew shed, so would probably suit someone with a similar capacity, although the control panel is wired for single-phase appliances (but spread across the 3 phases) so could be re-wired for a decent single phase supply if need be, or used on smaller elements.
Note: The control panel would need to be wired up by an electrician. - $270
1 x in-line chugger pump - $100
1 x keg king pump - $50
1 x 50lt keggle HWT w/ sight glass, ball valve and 2.2kW element - $100
1 x Dual roller grain mill with hopper - $80
1 x beer filter (brand new) - $20
1 x hydraulic hole punch - $40
Pickup from Southern Highlands, NSW
Happy to answer any questions you might have.
Please see photos in posts below.
Last edited:
