schoey
Well-Known Member
- Joined
- 9/9/04
- Messages
- 123
- Reaction score
- 18
I'm unable to brew ATM due to other commitments and am offloading some of my gear.
40L Crown urn with hidden element. The original tap has been replaced with a ball valve and an elbow on the inside to collect water/wort from the bottom of the vessel. This has been a workhorse for me and has been used as both a kettle and HLT in different brewing setups I've used over the years. Like all my gear, it's been sitting for a few years and requires a clean (stainless cleaner will have it looking like new again pretty easily)
$150
Keg King 25w Mag drive pump. Includes a ball valve and male cam-lock hose fittings. Mounted to an piece of MDF (can easily be unscrewed though).
$25
3 Erlenmeyer flasks (2L, 1L and 250ml). These were used for yeast handling and the 2L flasks has been used on direct flame with no issues.
$5 - The 5L flask pictured is no longer available
40L Crown urn with hidden element. The original tap has been replaced with a ball valve and an elbow on the inside to collect water/wort from the bottom of the vessel. This has been a workhorse for me and has been used as both a kettle and HLT in different brewing setups I've used over the years. Like all my gear, it's been sitting for a few years and requires a clean (stainless cleaner will have it looking like new again pretty easily)
$150
Keg King 25w Mag drive pump. Includes a ball valve and male cam-lock hose fittings. Mounted to an piece of MDF (can easily be unscrewed though).
$25
3 Erlenmeyer flasks (2L, 1L and 250ml). These were used for yeast handling and the 2L flasks has been used on direct flame with no issues.
$5 - The 5L flask pictured is no longer available
Last edited:
