FS - 2" Tri-Clamps

[bradleybiscuits]

I've got 18 x 2" Tri-Clamps FOR SALE.
304 Stainless Steel never been used - ordered the incorrect size (idiot!!).

$100 for the lot OR $6.50 each

I'm in Tamborine, QLD though can do a drop into Gold Coast or Brisbane.
Also coming down to Melbourne for Good Beer Week if your Melb based.

Approx 3kg weight total, shipping calculated on destination.

 

[sstacey]

Bradleybiscuits, are these the correct size to fit around a keg opening?

 

[bradleybiscuits]

SPS………sorry mate I don't know myself.
But doing a quick google a Sanke Keg does take 2" Tri-Clamp yes.

 

[BradG]

FYI a " 2 inch triclamp" suits 50.8 OD tube, and clamps a flange with OD of 60.5mm OD. A clamp which fits on a Sanke is actually a 1.5"/1" clamp, with OD of 50.4mm

 

[bradleybiscuits]

There you go then SPS.

 

[bradleybiscuits]

Curiosity got the better of me and every search I do comes back with a 2" Tri Clamp.
BrewersHardware even sell the conversion kits.
Are Australian Sankes a different size?
I don't know but there's guys on here pointing people to 2" Tri Clamps as well as BrewersHardware.
Anyway……… I would love to know my self for future project.

 

[620rossco]

Yes they fit on an aussie keg. Standard distillers fitting to rig a column on a keg boiler. The ridge needs to be cut off the bottom of the seal to connect to the keg.

 

[Parks]

A clamp which fits on a Sanke is actually a 1.5"/1" clamp

I disagree with this statement 100%.

I have both 1.5" and 2" triclovers. The 1.5" are the ones we see as standard in brewing applications and the 2" ones clamp onto kegs and other distilling or RIMS setups.

 

[BradG]

I was wrong. Apologies. I just wrote a lengthy reply trying to redeem myself, but when pressing send, an error occurred and the message was lost. I'm not going to try it again.

Again, apologies. Sanke keg is 60 point something OD = 2" sanitary clamp.

Check ASME BPE or AS1528 for further details. Stay away from European clamps. They'll **** y'up.

 

[bradleybiscuits]

BradG I will only except your apology if you purchase the 18 clamps!!!!!!![emoji106]
Otherwise………your dead to me.

 

[BradG]

Best part is, I work with tube and triclamps extensively.

Sorry, I've got a couple of 2" clamps already.