• If you have bought, sold or gained information from our Classifieds, please donate to Aussie Home Brewer and give back.

    You can become a Supporting Member or click here to donate.

Ebay, Gumtree and FB Marketplace

Australia & New Zealand Homebrewing Forum

Help Support Australia & New Zealand Homebrewing Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
its another brew Sunday and after a few drinks I'm checking out the latest stuff on ebay :) today I ordered two temperature controllers and 2 spare corny kegs for $107 because you can never have enough kegs..

Temp controllers one no name for $8 and one inkbird with EU plugs for $25

https://www.ebay.com.au/itm/4-PLUG-...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

https://www.ebay.com.au/itm/Electro...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

https://www.ebay.com.au/itm/2x19L-2...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

cheers
stefan
 
Kitchen scales suitable for measuring grain.
Currently $10.00 off and if you scroll down the page to get the discount code you get a further 20% off.

Delivered to my door for $26.39 :bigcheers:
 
Hi Stefan, ROs’, where to start? To answer your question first, not exactly but there are issues with cheap Chinese membranes and what they wont stop and how low they can get the ppm. you want your RO to be 1 or 2 ppm max, not 10 or 20 and you want it to stop the ammonia part of any chloramine.

I have one of these its very good, don't rush in, I will give you some RO and you can give it a try I will be in Vic for a week I’l pmu when I get back. Now you will have to read Brun Water and work out what minerals you need (I have them np) or ask here its a very good knowledge base :-}

Your not Stefan who flys r/c down the beach in HH?

ps check your water pressure RO units have min operating requirements but.

https://www.psifilters.com.au/laund...se-osmosis-system-with-gauge-low-waste-1.html
 
Looks like I need to upgrade my RO system. I have a PSI countertop RO system which I use for brewing. The filters are getting a bit over 12 months old now and PPM came back at 9 for the batch I did yesterday. Should I be looking at upgrading to the unit you've linked scomet?
 

Latest posts

Back
Top