DJ_L3ThAL
Such rapp, very bass
- Joined
- 11/5/10
- Messages
- 3,188
- Reaction score
- 1,451
As per the title, my kegerator is a Fisher & Paykel C450. I've searched for detailed drawings but none show where the coils typically run or if the compressor hump is simply insulation like the door. Given there are already penetrations for the electrical wiring and refrigeratant lines going through the "top" of the compressor hump, does that mean it would be safe to drill a hole (Approx 10-15mm) through the corner of the compressor hump (corner closest to the inside of the fridge.
The reason I ask is I want to sit my gas bottle outside the fridge now for various reasons, so bringing the gas line in through the corner of the compressor hump would be ideal.
The C450 fridge in particular is fan forced and all fridge, although the top 2/3 of the sides of the fridge feel warm from the condensor coils and the bottom feel quite cool (guessing that's heat loss through the insulation but I'm worried there are coils throughout the sides entirety.
The reason I ask is I want to sit my gas bottle outside the fridge now for various reasons, so bringing the gas line in through the corner of the compressor hump would be ideal.
The C450 fridge in particular is fan forced and all fridge, although the top 2/3 of the sides of the fridge feel warm from the condensor coils and the bottom feel quite cool (guessing that's heat loss through the insulation but I'm worried there are coils throughout the sides entirety.